DuraLink 35 Sealant, 10.1 oz tubes (CASE of 24) | ChemLink #F1263
Chem Link DuraLink 35 Multi-Pupose Sealant
DuraLink 35 is a multi-purpose elastomeric joint sealant that is designed for use where joints are subject to movement. This resilient joint sealant will resist dirt and dust and won't crack or shrink from sunlight, dry, wet, hot or cold weather. DuraLink 35 is ideal for a wide range of applications where joint movement requires compression and extension in excess of 35%. It can be applied to damp surfaces at temperatures as low as 32° F (0° C).
- Chem Link DuraLink 35 White is an extremely elastic, moisture-cured sealant designed for use where joints are subject to movement.
- It resists dirt pickup and does not shrink or crack.
- DuraLink 35 is paintable and can be applied in wet/damp, cold temperatures of 32°F.
- Eco Friendly, Green, Solvent Free
- DuraLink 35 comes in 12 different colors
- DuraLink 35 bonds with almost anything, including: acrylic, epoxy, galvanized steel, anodized aluminum, copper, vinyl siding and windows, wood, polystyrene foam, fiberglass panels, damp masonry and even difficult surfaces like Kynar 500® PVDF and other anodized metals and coatings.
Chem Link DuraLink 35 Multi-Purpose Sealant, F1263.
DuraLink 35 is a multi-purpose, moisture cure, elastomeric high performance sealant. DuraLink 35 has excellent elastomeric properties which is ideal for a wide range of applications including difficult surfaces such as Kynar 500® PVDF and other anodized metals and coatings. DuraLink 35 is isocyanate free, and solvent free, paintable and SWRI validated for ± 35% joint movement. With DuraLink 35 being a moisture-curing polyether sealant, it is effective in damp, dry or cold climates while also being free of solvents. It will not shrink upon curing, bubble on damp surfaces as polyurethanes sealants often do, or discolor when exposed to UV light. Chemlink DuraLink 35 has excellent elastic properties and adheres to most construction materials including difficult surfaces such as Kynar 500® PVDF and other anodized metals and coatings.
Compatible Substrates:
- Kynar 500® PVDF Coated Metal
- Brick, Concrete and Stone
- Galvanized Metal, Aluminum
- EPDM and SBS Mod Bit.
- EPS Foam, Engineered Plastics, PVC, B.U.R (Built up Roofing)
- Glass, Fiberglass FRP, James Hardie Board, Vinyl Siding
Basic Uses:
- Window and door frames, Siding
- Pre-cast concrete, Block and Masonry
- Weather Sealing, Cove Joints, Curtain Walls
- Parapets, Expansion joints
- Transportation
| SKU | CHE-F1263 |
|---|---|
| Manufacturer Part Number | F1263 |
| Manufacturer | CHEM LINK |
| Weight | 25lb |
| Country of Manufacture | United States |
- SOLVENT FREE 100% solids will not shrink
- NON-SLUMP applies vertically and overhead
- COLOR STABILITY will not suntan
AVAILABLE SIZES:
- Carton of 24 – 10.1 oz cartridges (12 colors)
- Carton of 12 – 28.0 oz cartridges (Gray & White is standard, others may need to be be made-to-order)
- Carton of 12 – 20.0 oz sausages (White & Gray standard, others may need to be made-to-order)
- 2-gallon pail, 5-gallon pail, and 50-gallon drums are made-to-order only
INSTALLATION:
Bonding surfaces should be clean, dry and free from all contamination that may inhibit the sealant’s performance. Isopropyl alcohol is an effective cleaner for surface preparation. Install all joint applications per ASTM and SWRI recommendations and guidelines. Please contact customer service for application guidelines for temperatures below 32 degrees Fahrenheit (0 degrees C). Maintain sealant at room temperature before application to ensure adequate tooling and adhesion. This product sets rapidly upon exposure to moisture.
Because DuraLink 35 is a moisture-curing polyether sealant, it is effective in damp, dry or cold climates and is free of solvents and isocyanates. It will not shrink upon curing, bubble on damp surfaces as polyurethanes sealants often do, or discolor when exposed to UV light. DuraLink 35 has excellent elastomeric properties and adheres to most construction materials including difficult surfaces such as Kynar 500® PVDF and other anodized metals and coatings.
