DuraLink 50 Super Adhesion Sealant, 10.1 oz (CASE of 24) #F1260 | Chem Link
DuraLink 50 Super Adhesion Sealant, 10.1 oz tubes, 24 Per Carton #F1260
Elastomeric moisture curing sealant that is specifically designed for use in cementitious siding, metal architechture, curtain wall construction and in joint that are subject to movement. DuraLink 50's adhesion to difficult surfaces permits its use on anodized metal and coatings such as Kynar 500® PVDF.
- Chem Link DuraLink 50 will not stain absorbent stone substrates like limestone or marble
- Eliminates out-gassing on green concrete
- Protects against “sun tanning” or discoloration when exposed to UV Sunlight
Chem Link DuraLink 50 Super Adhesion Sealant, F1260 case of 24 x 10.1 oz cartridge tubes. Chem Link DuraLink 50 is an extremely elastic moisture curing sealant designed for use in cementitious siding, metal architechture, curtain wall construction and joints subject to movement. DuraLink 50's adhesion to difficult surfaces permits its use on anodized metal and coatings such as Kynar 500® PVDF. It is ideal for a wide range of applications where joint movement requires compression and extension in excess of 50%. Chemlink DuraLink 50 is a moisture-curing super-adhesion sealant that cures quickly to form a soft rubber seal.
Compatible Substrates:
- Kynar 500® PVDF Coated Metal
- Brick, Concrete and Stone
- Galvanized Metal
- EPDM and SBS Mod Bit
- Aluminum
- EPS Foam
- Engineered Plastics, PVC
- B.U.R (Built up Roofing)
- Glass
- Fiberglass FRP
- James Hardie Board
- Vinyl Siding
Basic Uses:
- Window & door frames, Siding
- Pre-cast concrete, Block & Masonry
- Weather Sealing, Expansion Joints
- Cove Joints, Curtain Walls, Parapets
- Expansion joints
- Transportation
Carton of 24 x 10.1 oz cartridge tubes of DuraLink 50 Super Adhesion Sealant
| SKU | CHE-F126X |
|---|---|
| Manufacturer Part Number | F1260 |
| Manufacturer | CHEM LINK |
| Weight | 25lb |
| Country of Manufacture | United States |
DuraLink 50 is an extremely elastic, moisture-cure, elastomeric sealant designed for use in roofing, cementitious siding, metal architecture, curtain wall construction and joints subject to movement. DuraLink 50 has excellent elastomeric properties, which is ideal for a wide range of applications, including difficult surfaces such as Kynar 500® PVDF, other anodized metals and coatings, and can be used as a vinyl siding sealant as well. DuraLink 50 is isocyanate-free, paintable and SWRI validated for ± 50% joint movement.
• Bonds to Kynar 500 PVDF coated metal
• Solvent-free, 100% solids will not shrink
• Non-slump, applies vertically and overhead
• 40-minute skin over
• No outgassing on damp surfaces
• Available in a wide range of colors
• Color stability, will not suntan
• Paintable after 24 hours
• Made in the USA — ISO 9001:2015 certified processes
SOLVENT FREE 100% solids will not shrink
ADHERES bonds to Kynar 500 PVDF coated metal
NON-SLUMP applies vertically and overhead
COLOR STABILITY will not suntan
JOINT MOVEMENT +/- 50% joint movement
