1-Part Penetration Sealant, 10.1 oz Tubes (CASE of 24) ChemLink F1428
ChemLink 1-Part Pourable Penetration Sealant CHE-F1428
1-Part is a moisture curing, pourable sealant designed for use in pitch pans, pockets, ChemCurbs, E-Curbs and other roof penetration seals. 1-Part is suitable for application in damp, dry, or cold climates. 1-Part is solvent free, contains no isocyanates and will not shrink upon curing. 1-Part has resilient “elastomeric” properties and excellent adhesion to most construction materials. 1-Part can be used effectively in many difficult construction site conditions and cures in wet or dry conditions at temperatures as low as 32°F / 0°C. 1-Part’s low durometer accommodates greater movement in penetration seals than typical urethane sealants.
Advantages:
- Solvent free, 100% solids will not shrink
- 20 minute skin over
- No outgassing on damp surfaces
- Good UV stability, will not suntan
- Paintable within 24 hours (See limitations)
- Self leveling, no special tools or mixing required
- Application at temperatures as low as 32°F (0°C)
Chem Link 1-Part Penetration Sealant
10.1 oz Cartridge Tubes, Case of 24
ChemLink 1-Part Pourable Sealant can be used with the ChemLink ChemCurb System to address the most common source of leaks – Roof penetrations. Pipes, mechanical equipment, vents, solar panels and lightning protection are examples of penetrations which, in time, will create avenues for water. Repeated cycles of load, heat, cold, moisture, water ponding, and ultraviolet inevitably degrade pitch pans, rain caps, boots and other types of seals aimed at preventing leaks.
1-Part is a moisture curing, pourable sealant designed for use in pitch pans and warranted ChemCurb/E-Curb penetration seals. 1-Part is suitable for application in damp, dry, or cold climates.
Compatible Substrates:
- Single Ply Membranes
- APP with gran. target
- TPO with TPO Primer
- SBS Mod Bit / BUR
- PVC / PIB
- Asphalt
*Case quantites are (24) 10.1 oz Tubes, Color: Gray
SKU | CHE-F1428 |
---|---|
Manufacturer Part Number | F1428 |
Manufacturer | CHEM LINK |
Weight | 25lb |
Country of Manufacture | United States |
Compatible Substrates:
APP with gran. target, PVC/PIB, Single Ply membrane, Asphalt, TPO with TPO Primer, SBS Mod BIT/BUR