STEINEL HG2620E Hand Welder Heat Gun with Case | 110047485

In stock
Check for local delivery
$375.00

STEINEL HG 2620 E Hot Air Hand Welder Heat Gun with Case #110047485

STEINEL HG 2620 E Heat Gun has a temperature range of 120°F to 1300°F and is the most powerful, accurate, and long lasting handheld heat welder on the market. The STEINEL HG2620E is equipped with the longest lasting heating element in existence, lasting up to 3X longer than the competition. These DuraTherm™ Heating Element Coils are wound through a series of ceramic disks achieving full encapsulation. This provides even heat and added support helps to prevent coil breakage. Thanks to its robust design and heavy-duty 16 foot H07 rated flexible power cord with built-in strain relief, it is the safest, most dependable heat tool in the roofing industry.

BENEFITS OF HG2620E:

  • Temperatures up to 1300°F
  • The 2620 Heat Gun is double insulated – no GFCI required
  • 1 YEAR WARRANTY ON HEATING ELEMENT
  • 1 YEAR WARRANTY ON HEAT GUN
  • Brushless Motor has a 10,000 hour life expectancy

INCLUDES:

  • HG 2620 E Heat Gun
  • Heavy Duty Storage + Carrying Case
Financing Available for orders over $1,000

STEINEL HG 2620 E hot air heat gun tool is controlled by a toggle in 10°F steps, with temperatures between 120°F - 1300°F while letting you set 4 individually tailored programs. The temperature is indicated on the LCD information display where it is easy to read at any time. The airflow rate is continuously variable between 2 – 13 cfm and is easy to adjust. Full air-pressure power is 3,000 Pa. The powerful brushless motor gives our flagship tool a working life of over 10,000 hours. Thanks to its robust design as well as the specially protected electronics with fine dust filter, four individually selectable programs and the heavy-duty H07 power cord, it is the safest, most dependable heat tool on any construction site. With a 1 Year Warranty on the entire heat gun tool including a 1 YEAR WARRANTY ON THE HEATING ELEMENT, it is obvious why roofers are switching from the Leister Triac to the Steinel HG2620E Hand Welder.

 Output:  1750 W 
 Amps:  14.8 A
 Temperature:  120 - 1300 ˚F (50 - 700 ˚C)
 Airflow rate:  2 - 13 cfm (+/- 0.5 cfm)
 Air pressure:  3,000 Pa
 Motor:  Brushless
 Motor life:  10,000 hours
 HEATING ELEMENT:  2,000 hour guarantee
 Temperature setting:  on display, in 10˚F steps by toggle
 Heating element:  ceramic heating element
 Lockable Override Control (LOC):  yes
 Create Preset Customizable Programs:  yes
 Thermal cutout:  yes
 Double Insulated:  yes
 Power Cord:  Industrial grade rubber
 Nozzle Diameter:  1.26” (32.00 mm)
 Dimensions (l x w x h):  14.10” x 3.60” x 3.70”
 Voltage:  120 VAC, 50/60 Hz
 Weight:  1.85 lbs (29.63 oz)
 Warranty:  One year on Heating Element & Welder
 

 

More Information
SKU STE-110047485
Manufacturer Part Number HG2620E
Weight 2.5lb