Copper-Tite Roof Drain Retrofit w/ Clamping Ring + Tape Seal (BCTS-9CR) | MARATHON

In stock
Check for local delivery
As low as $208.45

COPPER-TITE 9ā€Ā Retro Drains w/Ā 18ā€ Flange, 10ā€ Clamping Ring & Tape SealĀ 

COPPERĀ for reliable longevity,Ā TITEĀ for a secure water tight fit. The CopperĀ Tite retrofit roof drain isĀ made up of a copper body, ABS clamping ring,Ā strainer domeĀ and expanding tape sealĀ to prevent water backflow.

  • Quick and easy to install w/Ā Copper flange,Ā New clamping ring style for single-ply roofĀ systems
  • AllĀ Copper Tite Drains Standard LengthĀ =Ā 9 inches
  • Drains come with standardĀ 10ā€ plastice strainer,Ā alternate options available

Financing Available for orders over $1,000
More Information
SKU MAR-BCTS-9CR
Manufacturer Part Number BCTS29CR
Weight 6lb

MARATHONĀ COPPER-TITE Drains are an economical answer to potential water back-up problems. They are designed to fit neatly into old existing drains in a retro-fit application.

COPPERTITE X 9ā€ ā€ 18ā€ FLANGE, WITHĀ 10ā€ CLAMPING RING & TAPE

ALL COPPERTITE DRAINS STANDARD LENGTH IS 9ā€ LONGER LENGTHS AVAILABLE ā€ ALL DRAINS SUPPLIED WITH 10ā€ PLASTIC STRAINER

3 EASY STEPS TO INSTALL:

STEP 1 Inspect the old drain for possible cracks and for a smooth clean surface. Scrape away old asphalt and dirt. Use a heat gun to soften old asphalt and to achieve a relatively dry surface, if necessary.

STEP 2 Test the size of the new COPPER-TITE drain by inserting it into the now clean original drain before removing the compression tape. With the correct size of COPPER-TITE now confirmed, remove the drain, release the compression tape and promptly re-insert the COPPER-TITE drain. The tape gradually expands to fill the space surrounding the outlet of the new COPPER-TITE there-by creating the back-up seal feature.

STEP 3 Flash in the drain flange according to methods determined by the membrane manufacturer and/or the roofer using the clamping ring, if applicable. Attach the strainer dome.

OPTIONS & SPECIFICATIONS STRAINER DOMES: Plastic is standard, Aluminum & Cast Iron is optional. FLANGE OPTIONS: Plain finish -N/C ā€¢ PVC & TPO coatings

SPECIFICATIONS:

Roof Drain Pipe Size Part # Specification Flange Size

Part #

Specification Flange Size Part # Specification Flange Size
2" CST29 175 x 9 (SF) 14" CTS29CR 175 x 9CR (LF) 18" CTS29CR(E) 175 x 9CR (SF) 14"
3" CTS39 275 x 9 (SF) 14" CTS39CR 275 x 9CR (LF) 18" CTS39CR(E) 275 x 9CR (SF) 14"
4" CTS49 375 x 9 (SF) 14" CTS49CR 375 x 9CR (LF) 18" CTS49CR(E) 375 x 9CR (SF) 14"
5" CTS59 475 x 9 (LF) 18" CTS59CR 475 x 9CR (LF) 18" Ā  Ā  Ā 
6" CTS69 575 x 9 (LF) 18" CTS69CR 475 x 9CR (LF) 18" Ā  Ā  Ā 
8" CTS89 775 x 9 (LF) 18" CTS89CR 775 x 9CR (LF) 18" Ā  Ā  Ā 

(SF) Small Flange

(LF) Large Flange

INSTALLATION INSTRUCTIONS FOR MARATHON COPPERTITE RETRO DRAINS:Ā Just prior to inserting the COPPER-TITE drain the installer removes the exterior restraining tape and immediately sets the retro drain in place. The released tape gradually expands to fill the space between the COPPER-TITE drain and the existing drain sleeve making the connection watertight. COPPER-TITE sealant tape expands more slowly in cold temperatures. When heat is applied to the inside of the outlet the sealant tape expands more rapidly. Should the tape expand too much before inserting the COPPER-TITE drain, simply re-compress the tape by hand and then insert the drain.

Recommended items & accessories