Ultimate V-Manifold 2-Part Adhesive Applicator w/ Air
ULTIMATE V-Manifold with Air for 2-Part Adhesive Splatter, Bead, Air-Purge Spray Applications
The patented V-Manifold is constructed with simple straight flow paths to allow a free flowing stream of liquid components for 2 part adhesive application. Straight flow paths allow for less down time. No need to disconnect hoses to restore flow interruption. Quickly remove clogs with provided 12" drill bit. Fewer mixing tip changeouts.
-
GOLD MACHINED ALUMINUM BODY: Precision machined for effective use
-
SPLIT YOKE HANDLE: Quick polyol purge to prolong tip use
-
YOKE LOCK: Prevents accidental run out
-
AIR QUICK CONNECT: Bloplet spatter dispensing
-
3 GREASE FITTING: Prevents clogging of all 3 channels
-
FOREARM CUFF: Provides accurate control
ULTIMATE V-Manifold 2-Part adhesive splatter, bead, spray applicator for roofing. The patented V-Manifold is constructed with simple straight flow paths to allow a free flowing stream of liquid components for 2 part adhesive application. Straight flow paths allow for less down time. No need to disconnect hoses to restore flow interruption. Quickly remove clogs with provided 12" drill bit. Fewer mixing tip changeouts.
- GOLD MACHINED ALUMINUM BODY: Precision machined for effective use
- SPLIT YOKE HANDLE: Quick polyol purge to prolong tip use
- YOKE LOCK: Prevents accidental run out
- AIR QUICK CONNECT: Bloplet spatter dispensing
- 3 GREASE FITTING: Prevents clogging of all 3 channels
- FOREARM CUFF: Provides accurate control
FOR SPATTER APPLICATION:
-
Open air ball valve to purge grease, then shut off.
-
Attach mixing tip.
-
Turn on air.
-
Use yoke to turn on material and apply spatter.
FOR BEAD APPLICATION:
-
IMPORTANT: Fill air channel with grease before applying beads
-
Attach mixing tip
-
Use yoke to turn on material and dispense beads
SKU | PJR-GUN-ULTIMATE23 |
---|---|
Manufacturer Part Number | ULTIMATE-V |
Manufacturer | Amped Equipment |
Weight | 5lb |
Country of Manufacture | United States |
Length | 24in |
Width | 4in |
Height | 4in |
Ultimate V-Manifold 2-Part Adhesive air Spray Applicator Gun.
SETUP V-ULTIMATE:
-
Connect hoses and fittings to V-Manifold
-
For Spatter application attach air hose to quick connect
FOR SPATTER/SPLATTER APPLICATION:
-
Open air ball valve to purge grease, then shut off.
-
Attach mixing tip.
-
Turn on air.
-
Use yoke to turn on material and apply spatter.
TEMPORARY SHUTDOWN
-
Use yoke to turn off material.
-
Let air run to purge mixing tip of material
-
Turn off air
FOR BEAD APPLICATION
-
IMPORTANT: Fill air channel with grease before applying beads
-
Attach mixing tip
-
Use yoke to turn on material and dispense beads
TEMPORARY SHUTDOWN
1. Use yoke to turn off material.
2. Twist left side of split yoke to open just the polyol side and purge the mixing tip (2sec)
3. Close polyol and twist split yoke back together
RESUME
SHUTDOWN:
-
Close and lock yoke, then turn off air.
-
Leave mixing tip on
SAFETY:
Always wear safety goggles and gloves when using the V-Manifold. Never point the V-Manifold at, or near, people. Ensure that you, and those around you, are aware of the hoses to avoid tripping. Read and comply with all safety labels and safety manuals for products used with this device.