NZD - ISO Flush 1 Gallon Jug | GSP
Global Specialty Products USA, 1 Gallon Jug of NZD ISO FLUSH for Cleaning The PJR components, Pace Carts, and Removing A and B material from lines, hoses, and other 2-part polyurethane spray parts and low-rise foam equipment.
NZD ISO FLUSH™ Effectively Removes:
- Liquid & semi hardened Isocyanate Part (A), Polyol Part (B), Cured Polyurethane Reactive Hot Melt Urethane Adhesives from roll coating equipment & dispensing equipment, as well as many other Industrial Adhesives.
- Industrial Resins such as: Polyester, Vinylester, Epoxy and Pigmented Gel Coats, as well as, Fiberglass and Resin Mixture.
- Coatings such as, High & Low Solid Aliphatic, Water Born Epoxy Primers, Polyurethane, Acrylic, Varnishes and Alkyl Enamel.
NZD ISO FLUSH Isocyanate Cleaner & Neutralizer in 1 Gallon bottle jugs is highly effective in flushing excess Liquid Isocyanate from processing equipment (feed lines, feed tanks, mixing and metering equipment), as well as loosening and removing crystalized isocyanate residues and build-up from equipment and sprayer parts. No need to pre flush Part (A) with Mineral Oils prior to using NZD ISO FLUSH. Enhanced worker safety, environmentally friendly designed to remove Flexible and Rigid SINGLE COMPONENT Part A excess liquid Isocyanate with or without solid material or PART B (Liquid Polyol) from processing equipment (feed line, feed tanks, mixing and metering equipment), as well as, loosening and removing crystallized isocyanate residues and build-up from equipment and parts.
FEATURES & BENEFITS:
- High resin & polymer loading – can be used for an extended period
- Recyclable via vacuum distillation - resulting in reduced disposal costs
- Residue free – No Rinsing required
- Due to its low vapor pressure and high boiling point – it evaporates 237 times slower than Acetone and MEK; 600 times slower than Methylene Chloride. Therefore, whatever quantity you purchase, you will use and not loose to evaporation.
- Non-Flammable (lower insurance premium)
- Non- Corrosive & compatible (safe on most commonly used O-rings, gaskets and hoses)
- Non-Reactive (does not form any zoetrope, does not cause explosion)
- Low order of toxicity
- Low VOC (5.9 Lbs. / Gallon)
- Low Rate of Evaporation (Low Vapor Pressure / High Boiling Point)
- Workers have no exposure to harmful fumes (exposure to vapors are minimized)
- Whatever quantity product you purchase, you will use (it does not evaporate like acetone, MEK and MeCl2)
- Biodegradable
NZD ISO FLUSHING DIRECTIONS:
Use full strength at room temperature, Do Not heat this product. Charge NZD ISO FLUSH into isocyanates feed tank / feed line and CIRCULATE to remove free isocyanate remaining in tank, pump, and other components. If needed, purge the system once again with fresh NZD ISO FLUSH to purge the free isocyanate. No need to pre-flush Part (A) with Mineral Oil prior to using NZD ISO FLUSH.
Industries and Applications:
- Roofing
- Polyurethane Spray Equipment
- Spray Foam & Injection Mold
- Converting & Molding
- Polyurethane Foam Machinery
- Marine (Boat Manufacturers, Navy, Injection Mold)
- Fiberglass - Reinforced and Composites Plastics
- Urethane - Wood Laminates
- Automotive (microcellular foam seals and gaskets, durable elastomeric wheels and tires, seats and suspension bushings)
| SKU | PJR-GSPISOFLUSH1G |
|---|---|
| Manufacturer Part Number | D-W359585-J |
| Manufacturer | Global Specialty Products |
| Weight | 7.5lb |
| Country of Manufacture | United States |
| Length | 4.5in |
| Width | 11in |
| Height | 14in |
NZD ISO FLUSH Isocyanate Cleaner & Neutralizer in 1 Gallon bottle jugs is highly effective in flushing excess Liquid Isocyanate from processing equipment (feed lines, feed tanks, mixing and metering equipment), as well as loosening and removing crystalized isocyanate residues and build-up from equipment and sprayer parts. No need to pre flush Part (A) with Mineral Oils prior to using NZD ISO FLUSH.
NZD ISO FLUSH™ Effectively Removes:
- Liquid & semi hardened Isocyanate Part (A), Polyol Part (B), Cured Polyurethane Reactive Hot Melt Urethane Adhesives from roll coating equipment & dispensing equipment, as well as many other Industrial Adhesives.
- Industrial Resins such as: Polyester, Vinylester, Epoxy and Pigmented Gel Coats, as well as, Fiberglass and Resin Mixture.
- Coatings such as, High & Low Solid Aliphatic, Water Born Epoxy Primers, Polyurethane, Acrylic, Varnishes and Alkyl Enamel.
FEATURES & BENEFITS:
- High resin & polymer loading – can be used for an extended period
- Recyclable via vacuum distillation - resulting in reduced disposal costs
- Residue free – No Rinsing required
- Due to its low vapor pressure and high boiling point – it evaporates 237 times slower than Acetone and MEK; 600 times slower than Methylene Chloride. Therefore, whatever quantity you purchase, you will use and not loose to evaporation.
FLUSHING:
Use full strength at room temperature, Do Not heat this product. Charge NZD ISO FLUSH into isocyanates feed tank / feed line and CIRCULATE to remove free isocyanate remaining in tank, pump, and other components. If needed, purge the system once again with fresh NZD ISO FLUSH to purge the free isocyanate. No need to pre-flush Part (A) with Mineral Oil prior to using NZD ISO FLUSH.
