Gripple

No.2 Duct Trapeze 10FT x 90° Eyelet (1/4") Hangers (10-Pack)

In stock
Check for local delivery
$89.50

GRIPPLE No.2 Duct Trapeze with 10-Foot x 90 degree 1/4" Eyelet Hangers (Pack of 10)

#DT2-EY90QG-10FT

Gripple Duct Trapeze #2 Hangers with 10' x 90° 1/4" Eyelet Hangers come in a 10-pack bag, and the three attachment points use self-drilling screws to balance the load and at the same time eliminate channel support. This Gripple Duct Trapeze Hanger Kit is ideal for fast suspension of rectangular ducting or similar services, and typically used to suspend a variety of HVAC, mechanical and electrical services from different substrates. Can be shot fired into concrete or steel. Ideal for use with Gripple concrete screws for direct soffit mounting.

  • Purpose-made single channel, ideal for fast suspension of rectangular ducts.
  • No. 2 Max Safe Working Load: 100 lbs. Each
  • Pin allows rapid adjustment.
  • Load Rated at 100 lbs. with a 5:1 safety factor.
  • Come as a ready-to-use kit
Financing Available for orders over $1,000

Gripple DT2-EY90QG-10FT No.2 Duct Trapeze 10' x 90° 1/4" Eyelet Hangers come in bag of 10 ready to use sets. Gripple Duct Trapeze #2 Hangers with 10' x 90° 1/4" Eyelet Hangers come in a 10-pack bag, and the three attachment points use self-drilling screws to balance the load and at the same time eliminate channel support. This Gripple Duct Trapeze Hanger Kit is ideal for fast suspension of rectangular ducting or similar services, and typically used to suspend a variety of HVAC, mechanical and electrical services from different substrates. Can be shot fired into concrete or steel. Ideal for use with Gripple concrete screws for direct soffit mounting.

Manufacturer: Gripple

Item: Duct Trapeze No.2 Hangers with 10FT 90 degree Eyelet (1/4") 

Part Number: DT2-EY90QG-10FT 

Quantity: Bag of 10

  • Eliminates the need for a strut support
  • Suitable for ducting made from 0.6 - 1.5 mm gauge steel
  • Spreads the load across three fixing points
  • Attaches with self-drilling screws or pop rivets (not provided)
  • Optional rubber pad prevents air leakage and dampens vibration
  • Release pin allows rapid height adjustment
More Information
SKU GRIP-DT2-EY90QG-10FT
Manufacturer Part Number DT2-EY90QG-10FT
Manufacturer Gripple
Country of Manufacture United States

GRIPPLE #2 DUCT TRAPEZE FASTENER WITH 90 DEGREE EYELET AT 10FT

  • 10' Gripple #2 Duct Trapeze Hanger with 90º Eyelet
  • Used to suspend a variety of HVAC, mechanical and electrical services from different substrates
  • 90 Degree Eyelet
  • Can be shot fired into concrete or steel
  • Ideal for use with Gripple concrete screws for direct soffit mounting
  • Duct Trapeze Hanger Number 2
  • Ideal for fast suspension of rectangular ducting or similar services.  
  • Eliminates the need for a strut support
  • Suitable for ducting made from 0.6 - 1.5 mm gauge steel
  • Spreads the load across three fixing points
  • Attaches with self-drilling screws or pop rivets (not provided)
  • Optional rubber pad prevents air leakage and dampens vibration
  • Release pin allows rapid height adjustment