A-40 MELTER | Hot Rubber Melter Kettle (Propane) A&A Melters
A&A Melters A-40 Melter
The A 40 is a very compact under-fired melter and has the same oil-less design as the larger sized rubber melters which reduces warm-up time to 20 minutes. Extra high temperature insulation permits movement from one roof deck to another without burning the operator. Stainless steel fire tube comes standard in the A 40 Hot Melt Kettle. AA Melters Rubber Master A-40 Hot Melt Kettle is perfect for Rubberized Asphalt Paving, Roofing, Sealing and more.
Heated Material Output:
- Efficiency 78.9%
- Material Capacity: 35 US gallons – Output Aprox 30 gal. / hr.
- Heat up time: 20-30 mins
AA Melters A 40 Melter
The A-40’s small dimensions allow it to fit into any elevator or through a standard doorway and the interchangeable power pack allows the contractor to purchase the super-quiet electric unit which is suited to a specific job where noise restrictions may be of concern.
SPECIFICATIONS: A-40 |
|
|---|---|
|
Heat Transfer Oil |
None Required |
|
Fire Tube |
4″ sch 80 Stainless Steel Pipe |
|
Capacity |
35 US Gallons |
|
Agitator |
Honda 4 H.P. Air-Cooled Engine, 110 V Electric or Optional Diesel Engine |
|
Overall Dimensions |
L-62″ W-31 3/4″ H-47″ 850 lbs. |
|
Burner |
Adjustable Liquid Propane 1 X 300,000 BTU or Optional Beckett Diesel Burner |
|
Temperature Controls |
Optional |
|
Inner Shell |
3/16″ Rolled Steel |
|
Outer Shell |
3/16″ plate |
|
Insulated jacket |
1/2″ Super High Temp. plus 2″ High Temp. Fiberglass |
|
Shipping Weight |
850 lbs |
STANDARD EQUIPMENT: Model A 40 Propane
- 35 gallon capacity
- (1) LPG torch ( manual control, complete)
- Sew/Eurodrive gear reducer
- Stainless steel fire tube
- Honda 4.0 Hp Air cooled gas or 110 electric drive
| SKU | AAM-A-40-GAS |
|---|---|
| Manufacturer Part Number | A-40 |
| Manufacturer | AA Melters |
| Weight | 850lb |
| Country of Manufacture | Canada |
| Length | 62in |
| Width | 32in |
| Height | 47in |
AA Melters Rubber Master A-40 Hot Melt Kettle for Rubberized Asphalt Paving, Roofing, Sealing and more.
- Efficiency 78.9%
- Material Capacity: 35 US gallons – Output Aprox 30 gal. / hr.
- Heat up time: 20-30 min
- Optional Equipment Available:
- (4) 6" Phenolic High Temperature Castors
- Flame Guard
- Automatic Temperature Controls
STANDARD EQUIPMENT: Model A 40 Propane Rubber Melter
-
35 gallon capacity
-
(1) LPG torch ( manual control, complete)
-
Sew/Eurodrive gear reducer
-
Stainless Steel fire tube
-
Honda 4.0 Hp Air cooled gas or 110 electric drive