2 Part Pourable Sealer Pro Pack (2 Packs)
FLEXIBLE | flexible down to -40F
VERSATILE | can be used above or below grade
SELF-LEVELING | fills and penetrates cracks with tough urethane rubber
APPLICATION TEMP | can be applied at temps as low as 40F
Chem Link Pro Pack is a two-component, RTV, urethane pourable sealant. It is designed for use to fill warranted ChemCurb penetration seals & pitch pans on low-slope roofing systems. It can also be used in horizontal self-leveling, sealing and waterproofing applications. When properly mixed, Pro Pack cures to a tough rubber mass with excellent low temperature elasticity and adhesion.
- Pro Pack resists deterioration caused by weather, water and ice. It is also resistant to oils, fuels, and many chemicals.
- Pro Pack is 100% solid rubber.
- Pro Pack has no solvents, very low volatile organic content (V.O.C) and will not shrink after application.
- Pro Pack has excellent adhesion to most construction materials.
SKU | CHE-F1000-BL |
---|---|
Manufacturer | CHEM LINK |
Weight | 20lb |
Country of Manufacture | United States |
INSTALLATION:
-
Bonding surfaces should be clean, dry and free from all contamination that may inhibit the sealant’s performance.
-
Remove all previously applied caulk, mastic, cement, asphalt, and other contaminants from penetrations with a wire brush.
-
Brush away all gravel or loose granules. Isopropyl alcohol is an effective cleaner for surface preparation.
-
Please contact customer service for application guidelines with temperatures below 32°F (0°C).
-
Do not use on TPO without the use of TPO primer.
-
Do not use on Hypalon.
-
Smooth APP membranes require a granulated target.
-
Material shall be kept at room temperature for 24 hours before mixing.
-
Mix Part A and Part B (7 : 1 by volume) for a minimum of 5 minutes, making sure the pourable sealer is a uniform black color.