CHEM LINK

WebSeal Roof Repair Tape (Full Cases)

In stock
Check for local delivery
As low as $44.67

ADHESION 19 lb/inch width

TEMP RANGE application temp -20F to 150F ambient

ELONGATION >500%

PLIABILITY no cracks in membrane

SHELF LIFE up to 5 years

Financing Available for orders over $1,000

For use on virtually all roofs, WebSeal Roof Repair Tape is designed to hold coatings, whether water or solvent based. WebSeal makes the roof water-tight prior to application of coating, creating a superior, faster method of waterproofing over conventional 3 course applications, eliminating dependence on the roof coating as a water barrier. WebSeal remains flexible to temperatures as low as -70° F making it virtually impossible to thermally shock the seam causing a leak.

WebSeal bonds to a wide range of surfaces including difficult roof materials such as EPDM, TPO, aged PVC, SBS, APP modifieds, asphalt BURs, coal tar BURs, plus all metal roofs, tiles, shingle, aluminum, galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene, fiberglass, brick, concrete, masonry, OSB, etc.

More Information
SKU CHE-F237X
Manufacturer CHEM LINK
Product Sheet (1.01 MB)
Safety Sheet (219.02 kB)

INSTALLATION:

  • Surface must be clean and dry.

  • Moisture, dust, dirt or other foreign matter should be removed.

  • Remove oil and grease, etc. with isopropyl alchohol or a non-residue cleaner such as acetone or lacquer thinner.

  • Remove salt and other contaminants.

  1. Install WebSeal over the repair area, removing the release liner gradually to prevent contamination of the adhesive prior to application.

  2. Rub or roll with pressure using your hand or steel roller to activate bonding process.

  3. This material may be applied to clean dry surfaces from 150° F to -20° F ambient.

  4. Treat surface with EternaPrime for installations from 40° F to -20° F ambient.

  5. A topcoat of roofing coating is necessary for UV protection.