Global Specialty Products

SURF A LUBE - 5 Gallon Pail, Equipment Storage Fluid | GSP

In stock
Check for local delivery
$410.55

SURF A LUBE 5-Gallon Pail | Global Specialty Products 

Eco Friendly, New Generation Maintenance Fluids Companion product to GSP’s Resin and Urethane Foam Removers. Non-reactive with Isocyanates, Polyol and other polymers, resins and coatings.

SurfaLube  Equipment Storage Fluid is used in urethane dispensing equipment when stored for an extended period of time, up to 36 months

Once the hoses and polyurethane spray equipment are thoroughly flushed with NZD ISO FLUSH™ Isocyanate Cleaner, SurfaLube is introduced to the equipment through the hoses and spray lines. This helps eliminate formation of crystallized Isocyanates that may form when remaining residue reacts with moisture in the air.

Environmentally Safe Urethane Spray Equipment Storage Fluid - Surf A Lube

  • Compatible with machines & transfer pumps made of Carbon Steel or Stainless Steel & Aluminum Alloys
  • VOC  Exempt
  • Non Flammable, Non Corrosive
  • Recyclable
  • Non Ozone Depleting
  • Non-Hydroscopic
  • No ODC’s
  • Stable under normal storage conditions
  • Biodegradable
Financing Available for orders over $1,000

5 Gallon SURF A LUBE is the only VOC Exempt, all-purpose storage fluid for dispensing equipment including: spray foam equipment, spray guns, hoses and lines. It contains NO Phthalate, Phenol, or other highly hazardous chemicals listed on California Prop 65, HAPs, SARA 313, etc. Non-Hydroscopic and stable (does not gel) in extreme cold environment (Freezing Point: -50°F). It is recyclable via vacuum distillation, eliminating disposal costs. Is a companion product to GSP-USA's resin and urethane foam removers such as: NZD ISO FLUSH™, SURF X FLUSH™ 2000 and FOAM OFF™ - MP. 

How to Prepare the System for Storage with SURF-A-LUBE:

Hoses and Lines:

  1.  Flush thoroughly with NZD ISO FLUSH™ Isocyanate Neutralizer to remove all liquid and semi-liquid Isocyanate (Part A).
  2. During Flushing, make sure the heaters on the machine are turned off.

Spray-Guns:

  1. Flush Spray Guns thoroughly with SURF X FLUSH 2000 ™ to remove most uncured and cured polyurethane.

Pumps:

  1.  Pump SurfaLube   into the system so that it remains in hoses and lines.
  2. Store unit in a cool and dry (moisture free) area for up to 36 months.
  3. When starting up the unit, flush out SurfaLube   completely!
  4. Introduce Polyurethane into the unit (The first few pounds of Part A & B sprayed through the system should be scrapped to avoid any adhesive failure.
  5. Then you are Ready toGo!

SURF-A-LUBE Equipment Storage Fluid Packaging Options:

  • 4 x 1 Gallon EasyPour Jug
  • 5 Gallon
  • 55 Gallon Steel Drums
More Information
SKU PJR-GSPSURFALUBE5G
Manufacturer Part Number 02-W400590-1P
Manufacturer Global Specialty Products
Weight 50lb
Country of Manufacture United States
Length 7.5in
Width 7.5in
Height 8in

SURF A LUBE 5 Gallon Pail of Equipment Storage Fluid is Made In The United States of America, is eco-friendly and environmentally safe for storing urethane dispensing tools and equipment sprayers for up to 36 months. Surf-A-Lube eliminates the formation and hardening of Diisocyanates (A), Polyurethane Foam, Polyurea Coating, as well as, a number of industrial resins (Polyester, Vinylester, Epoxy) which may form when any remaining residue reacts with moisture in the air. Is used in urethane dispensing equipment which is stored for an extended period. Once the hoses and polyurethane spray equipment is thoroughly flushed, SURF A LUBE™ is introduced into the equipment through spray lines for up to 24 months. This helps eliminate formation of crystallized isocyanates, polyurea, and other resins / coatings that may form when any remaining residue reacts with moisture in the air. Compatible with Machines and Transfer Pumps made of Carbon Steel or Stainless Steel and Aluminum Alloys. Preferred hose and gasket materials are: Teflon, EPR, Neoprene, Polyethylene Cork and Natural Rubber. Buna N, Hypalon and Viton are not suitable gasket materials for mid to long-term (days and weeks) storage. Information from material suppliers and specific conditions of contact should be considered in the selection of suitable materials.

New Generation SurfaLube™ Equipment Storage Fluid

  • Non-reactive with Isocyanates, Polyol and other polymers, resins and coatings
  • Improved Performance with Superior Environmental Profile - Coalescing property for long-term storage (up to 36 months).
  • Gentle on a majority of O-rings, gaskets, seals and lining
  • Does not freeze under severe cold environment (<-90 °F)

PREPARING SYSTEM FOR STORAGE:

Once the hoses and polyurethane spray equipment are thoroughly flushed with NZD ISO FLUSH™ Isocyanate Cleaner, SurfaLube™ is introduced to the equipment through hoses and spray lines. This will help eliminate formation of crystallized isocyanates that may form when any remaining residue reacts with moisture in the air.

Hoses & Lines: 

  • Flush thoroughly with NZD ISO FLUSH™ Isocyanate Cleaner to remove all liquid and semi-liquid Isocyanate (Part A). During Flushing, make sure the heaters on the machine are turned off.

Guns: 

  • Flush Spray Guns thoroughly with SURF X FLUSH 2000 ™ to remove most uncured and cured polyurethane.

Pumps: 

  • Pump SurfaLube™ into the system so that it remains in hoses and lines.
  • Store unit in a cool and dry (moisture free) area for up to 36 months.
  • When starting up the unit, flush out SurfaLube™ completely.
  • Introduce Polyurethane into the unit (The first few pounds of Part A & B sprayed through the system should be scrapped to avoid any adhesive failure. Then you are Ready to Go.
Recommended items & accessories