Stanchion to Wall Rest Assembly w/ Foot #FB-1928 | Fall Ban
Stanchion to Wall Rest Assembly with Foot - 1A for Fall Ban Roof Perimeter Fall Protection Stanchions FB-1928
The FallBan Cableguard System is the most versatile roof perimeter fall protection kit on the market. Fall Ban roof stanchions can be configured and adjusted in several different ways to accommodate gutters, parapet walls, gravel stops and overhang in a variety of shapes, heights and widths.
- Universal: Works for Every Job
- Versatile: Easily adjust to accomadate parapet walls, gutters, gravel stops, overhangs, and more roof types.
- Proudly Made In The USA
The Stanchion to wall rest full assembly with foot brace #FB-1928 is an integral component to the Fall Ban Cable Guard Stanchions, which create an OSHA compliant roof perimeter fall protection guardrail setup. The FallBan Cableguard System is the most versatile on the market with stanchions that can be configured and adjusted several different ways to accommodate gutters, parapet walls, gravel stops and overhang in a variety of shapes, heights and widths.
- Manufacturer: Fall Ban
- Item: Stanchion to wall rest full assembly with foot brace - 1A
- Part Number: FB-1928
- Color: Safety Yellow
- Dimensions: 31.25" x 2" x 2.25"
- Weight: 2.4 lbs
Benefits of FALL BAN Stanchions and Cable Guard Roof Perimeter Fall Protection:
- Generate More Profits While Maintaining Safety: In roofing when employees are free to work unrestricted by harnesses, ropes, or lanyards their productivity and efficiency increases dramatically, resulting in quicker job completion. What does this mean? It means higher company profits on every job, as well as OSHA compliant safety for you and your roofers or work crew.
Example of Labor Saving | Typical 100 sq. roof
Areas while not tied off on the roof estimated at 4.5 hours per sq. (3 hrs. tear off 1 ½ hrs. install). While tied off on the perimeter edge 9 hrs per sq. (6 tear off, 3 install). Labor calculated at $50 per hour per man.
| Using FallBan not tied off on the perimeter | Not using FallBan, tied off on the perimeter |
|---|---|
|
Install FallBan 3 men 4 hour = 12 hours |
23 sq. perimeter 23sq. x 9 hours = 207 hours |
|
100 sq. x 4.5 hours per sq = 450 hours |
77 sq open(77sqx4.5 hours per sq = 346.5 hours |
|
Dismantle Fall Ban 12 hours |
- |
|
Total hours 474 hours |
Total hours 553.5 |
|
X Labor cost $50 per hour |
X Labor cost $50 per hour |
|
Total $23,700 |
Total $27,675 |
|
Savings of $3,975 while using Fall Ban |
|
| SKU | FB-1928 |
|---|---|
| Manufacturer Part Number | FB-1928 |
| Manufacturer | FALL BAN |
| Weight | 2.4lb |
| Country of Manufacture | United States |
| Length | 31.25in |
| Width | 2in |
| Height | 2.25in |
Fall Ban Roof Stanchion to Wall Rest Brace with Foot Assembly -1A
- #FB-1928 for Cable Guard Roof Perimeter Fall Protection System.
Easy Installation Instructions for Fall Ban Universal Roof Stanchions Cable Guard Safety Rail OSHA Compliant Guardrail System
The Fall Ban system is easy to setup:
- Attach Stanchions along the perimeter of the roof 20 ft apart
- Install Diagonal Braces at corners and cable terminations
- Install Cable Termination Anchor Plate at ends of the cable run
- Roll out cable and hook onto Stanchions. 3 cables
- Install Mid Braces between stanchions
- Use Ratchet Pullers to tighten each cable, install warning flags, and you’re done
