SnowShoes - Snow Retention System-CLEAR | Chem Link F1202-CL
-
SOLVENT FREE: 100% solids, will not shrink
-
ADHERES: bonds to Kynar 500 PVDF coated metal
-
COLOR STABILITY: good stability, will not suntan
-
NEUTRAL CURE: will not promote metal corrosion
SnowShoes are molded from a tough polycarbonate polymer that can withstand heavy impacts at low temperatures. Effective on all metals, including Kynar 500® PVDF coated metal and copper. Also for use on slate, tile, EPDM rubber and PVC and TPO membranes. TPO primer is required with TPO membrane installation.
SnowShoes are designed with a unique “stealth” profile to be strong and inconspicuous. They are molded with a translucent matt finish that picks up the background color of roofing materials without reflecting sunlight. Paintable if strict color matching is required. Installation is easy with translucent DuraSil™ adhesive provided in every kit. No screws or mechanical fasteners are ever required. DuraSil bonds aggressively to all roofing materials, including Kynar finishes. It bridges irregularities and will never shrink.
SKU | CHE-F1202-CL |
---|---|
Manufacturer Part Number | F1202-CL |
Weight | 10lb |
INSTALLATION:
Bonding surfaces should be clean, dry and free from all contamination that may inhibit the sealant’s performance.
New galvanized steel may require a vinegar scrub to remove protective wax coating.
Isopropyl alcohol is an effective cleaner for surface preparation.
Please contact CHEM LINK customer service for application guidelines for temperatures below 32 degrees F (0 degrees C).
Maintain sealant at room temperature before application to ensure adequate tooling and adhesion.
This product sets rapidly upon exposure to moisture.
Please refer to data sheet for step-by-step installation guidelines.