10' Safety Rail Section 500005 (Guardrail Only) | BlueWater
The BlueWater Safety Rail 2000 "SR2K" Guardrail Kit is a non-penetrating, passive fall protection system for safety and compliance while working on a rooftop, elevated platforms, or working on ground level applications. The Safety Rail Guardrailing Kit is portable and can be used as a temporary or permanent system.
Safety Rail sections are constructed of high strength 1-5/8" inch steel tubing. The Guardrail Bases are made of 108 lbs of cast iron, and both the safety rails and bases come with your choice of a powder coated yellow finish or galvanized (other options available per request). Safety Rails connect to bases with four ports on each base that allow the rails to be placed in any position. When the bases are installed in a run with a 90 degree return on each end, the combined mass and geometry of installation creates an OSHA compliant barrier for roof edge fall protection.
- Install 600 Feet of Safety Rail In Less Than 1 Hour With 3 Workers!
- No intermediate counter weights required, reducing trip hazards
- Positive locking system secures rails into base
- Bases come standard with EPDM pads on bottom
- Comfortable handles are cast into each base for easy lifting and positioning
- Complies with OSHA regulations 29 CFR 1910.23 and 1926.502
The SafetyRail 2000 SR2K Guardrails and Weighted Rail Base is Non-Penetrating Passive Fall Protection and Fall Prevention Safety Rail can be used as temporary or permanent fall protection around roof edges, elevated platforms and other high work areas that require safety railing and OSHA Compliance. The BlueWater Tractel Safety Rail Guard 2000 is easy to setup and breakdown as a portable guardrail system, and is designed to be assembled, disassembled, and transported from job site to job site on a frequent and regular basis. The unique, lightweight yet heavy-duty design eliminates both the cost and danger of intermediate counterweights commonly used in other low-quality guardrail systems.
The SR2000 is simply a set of specific safety rails sized to your needs, accompanied by guardrail bases and sturdy long-lasting locking pins that are made to setup around an elevated work area to prevent falls and serious injuries while ensuring OSHA Compliance.
- Each Safety Guard Rail Kit Includes: Your Choice of Safety Rail Section Size, Rail Base and Locking Pins.
- Setup 600 feet of Safety Rail Guardrail in less than 1 Hour with only 3 workers!
- Rails sections are constructed of 1-5/8″ steel tubing. Each base includes 4 ports, allowing the rail to be placed in an infinite number of positions. Each base can support up to 4 rails, gate assemblies and optional toe-board brackets available.
- All BlueWater Tractel SR2K Safety Guard Rails meet the OSHA 42″ height requirement for top and 21.5″ for mid rails, ensuring OSHA and ANSI compliance and ratings.
Safety Rail Sizes and Part Numbers:
5' Safety Rail Guardrail #500001
| 500001 | 5' Safety Rail Guardrail Section | Yellow/Powder Coated | $179. |
| 500004 | 7.5' Safety Rail Guardrail Section | Yellow/Powder Coated | $189. |
| 500005 | 10' Safety Rail Guardrail Section | Yellow/Powder Coated | $202. |
| 300014 | BASE, Guardrail Base & Locking Pins | Yellow/Powder Coated | $289. |
| Part Number: | Product Description: | Color/Finish: | Price: |
| SKU | BLU-RAIL500005 |
|---|---|
| Manufacturer Part Number | 500005 |
| Manufacturer | BlueWater by Tractel |
| Weight | 30lb |
BlueWater Tractel SafetyRail 2000 Rail Guard Kit "SR2K" with 3 foot, 4 foot, 5 foot, 6 foot, 7.5 foot and 10 foot Safety Rail Sections for Passive Fall Protection on Roof Edges and Elevated Platforms requiring an OSHA Compliant Fall-Prevention Guardrail System for Roofer and Worker Safety.
Choose Powder Coated Yellow Safety Rails and Guardrail Bases, or Galvanized Steel Raiing Sections and Rail Bases.
Installing the Safety Rail Guard 2000 is a simple 3 step process:
Three workers can setup and install 600 feet of Safety Rail Guard Railing in less than 1 hour! Easy as 1-2-3! The best part of this Roof Safety Rail kit is the ease in which the entire guardrail system can be setup and broken down.
- Position the bases around the work area
- Insert rails into base ports
- Insert the securing pins and lock base into place
Unique rooftops and elevated platforms require the use of many different combinations of rail widths. Rails sections are constructed of 1-5/8″ steel tubing. Each base includes 4 ports, allowing the rail to be placed in an infinite number of positions. Each base can support up to 4 rails, gate assemblies and optional toe-board brackets available.
All BlueWater Tractel SR2K Safety Guard Rails meet the OSHA 42″ height requirement for top and 21.5″ for mid rails, ensuring OSHA and ANSI compliance and ratings.
The SR2K Safety Rail 2000 Rail Guard System requires each railing be counter-weighted by a base to prevent potential falls while working at elevated heights, rooftops, building and construction platforms and any leading edge work areas. This best rated, best priced, easy to install non-penetrating safety railing design uses a 108 lbs cast-iron base to support the railing and any person or contractor who may fall into it. This unique design minimizes tripping hazards by eliminating the need of an intermediate counterweight. All BlueWater Manufacturing Guardrail Bases feature four separate ports that allow the SafetyRails to be positioned in any horizontal direction. Each rail guard base can support up to 4 guardrails simultaneously.
- 4 port rail base allows infinite positioning of the safety rail sections
- Positive locking system secures rails to base
- Complies with OSHA regulations 29 CFR 1910.23 and 1926.502
- No intermediate counter weights required, reduces trip hazards
- Bases come standard with EPDM pads on bottom
- Comfortable handles are cast into each base for easy lifting and positioning
