S104 Adhesive Cleaner/Remover Aerosol Spray 650mL (22 Oz.) | TensorGrip
TensorGrip S104 Adhesive Cleaner and Remover (650mL) in 22 oz. Aerosol Spray Cans | Quin Global
Tensorgrip® S104 is a adhesive cleaner and remover designed to safely and powerfully remove adhesives and other tough substances. It’s formulated with CO-REZ Technology — an exceptional formulation incorporating a highly engineered resin and gas matrix. The result is greater coverage from less canister weight.
Advantages:
- Exceptional cleaning/degreasing power
- Non-corrosive
- Compatible with most plastics
- Biodegradable
- Cleans hoses, spray guns and other adhesive equipment
- Decal residue removal – safe for powder-coated surfaces
- Perfect for Cleaning Single-Ply and Two-Part Roofing Adhesive Spray Equipment, Hoses, and Applicators
TensorGrip S104 650mL Aerosol Spray is an adhesive cleaner, remover, and purging solvent in an aerosolized spray canister designed to safely and powerfully remove adhesives and other tough substances while being Non-Corrosive. S104 is suitable for use on most surfaces. S104 has xceptional cleaning and degreasing power, is Non-corrosive and compatible for use on most plastics. S104 Adhesive Cleaner was made to clean single-ply and two part roofing adhesive hoses, applicator spray guns, spray foam equipment parts and other tools & equipment with resin removal and residue removal strength as well.
DIRECTIONS FOR USE, S104 ADHESIVE CLEANER & REMOVER
- TensorGrip S104 can be sprayed on and wiped off - Wash off any remaining residue with water.
- The product will not be damaged by freezing - Warm up to room temperature for use.
For Spray Gun and Hose Cleaning:
- Disconnect spray gun and hose from adhesive canister.
- Immediately connect to cleaner canister and open canister valve.
- Flush out spray gun and hose for until clear (approx 45 seconds).
- Close canister valve and bleed pressure before disconnecting hose.
For Surface Cleaning:
- Hold spray gun 6”–10” from surface.
- Spray even coat of cleaner on the surface.
- Wait 3–5 minutes before wiping for best cleaning performance.
SKU | QG-CLEANS104-AA |
---|---|
Manufacturer Part Number | S104-650mL |
Weight | 2lb |
TENSORGRIP S104 ADHESIVE SPRAY GUN CLEANER AND GLUE REMOVER SPECIFICATION DETAILS:
TYPICAL PROPERTIES: |
|
Total Solids: 0% |
|
VOC Content: |
466.97 g/L (Canister) / 77% by weight (Aerosol) |
Color: Clear |
|
System Flammability: |
Flammable |
Solvent System Odorless mineral spirits |
|
Shelf Life: |
12 months from date of manufacture |
PACKAGING: |
|
650ml Aerosol Can |
|
7L |
Disposable Canister |
22L Disposable Canister |
HANDLING AND STORAGE of S104:
- Consult Safety Data Sheet prior to use.
- Do not store at temperatures over 120°F / 50°C.
- Avoid exposure to direct sunlight.
- Do not store directly on concrete floor.
- Always store above 60°F/15°C.
- When connected, keep valve open and hose pressurized at all times.
- Always test product to determine suitability for your particular application prior to use in production.