S104 Adhesive Cleaner and Remover (7 LITER) | TensorGrip

In stock
Check for local delivery
$104.00

TensorGrip S104 Adhesive Cleaner and Remover

Tensorgrip® S104 is a adhesive cleaner and remover designed to safely and powerfully remove adhesives and other tough substances. It’s formulated with CO-REZ Technology which is an exceptional formulation incorporating a highly engineered resin and gas matrix. The result is greater overall coverage rates with less canister weight at the same time.

Advantages:

  • Exceptional cleaning/degreasing power
  • Non-corrosive
  • Compatible with most plastics
  • Biodegradable
  • Cleans hoses, spray guns and other adhesive equipment
  • Decal residue removal – safe for powder-coated surfaces

TensorGrip S104 Adhesive Cleaner Sizes:

  • 7 Liter Canister, 22 Liter Canister, 650ml Aerosol Cans 
Financing Available for orders over $1,000

TensorGrip S104 is an adhesive cleaner/remover designed to safely and powerfully remove adhesives and other tough substances. S104 is suitable for use on most surfaces. S104 has xceptional cleaning and degreasing power is Non-corrosive, and compatible for most plastics. S104 Adhesive Cleaner was made to clean hoses, spray guns, and other adhesive equipment as well as decal adhesive residue removal.

DIRECTIONS FOR USE, S104 ADHESIVE CLEANER & REMOVER

  • TensorGrip S104 can be sprayed on and wiped off - Wash off any remaining residue with water.
  • The product will not be damaged by freezing - Warm up to room temperature for use.

For Spray Gun and Hose Cleaning:

  • Disconnect spray gun and hose from adhesive canister. 
  • Immediately connect to cleaner canister and open canister valve.
  • Flush out spray gun and hose for until clear (approx 45 seconds). 
  • Close canister valve and bleed pressure before disconnecting hose.

For Surface Cleaning:

  • Hold spray gun 6”–10” from surface. 
  • Spray even coat of cleaner on the surface. 
  • Wait 3–5 minutes before wiping for best cleaning performance.

S104 Adhesive Cleaner/Remover - Available Sizes:

  • 21 Oz. Aerosol Spray Cans
  • 7L Disposable Cylinder Tank Canister
  • 22L Disposable Cylinder Tank Canister
More Information
SKU QG-S104-7LTR
Manufacturer Part Number S104-7LTR
Weight 15lb
Country of Manufacture
Color

TENSORGRIP S104 ADHESIVE SPRAY GUN CLEANER AND GLUE REMOVER SPECIFICATION DETAILS:

TYPICAL PROPERTIES:

Total Solids: 0%

VOC Content:

 466.97 g/L (Canister) / 77% by weight (Aerosol)

Color: Clear

System Flammability:

 Flammable

Solvent System Odorless mineral spirits

Shelf Life:

 12 months from date of manufacture

PACKAGING:

650ml Aerosol Can

7L

Disposable Canister

22L Disposable Canister

HANDLING AND STORAGE of S104:

  • Consult Safety Data Sheet prior to use. 
  • Do not store at temperatures over 120°F / 50°C. 
  • Avoid exposure to direct sunlight. 
  • Do not store directly on concrete floor. 
  • Always store above 60°F/15°C. 
  • When connected, keep valve open and hose pressurized at all times. 
  • Always test product to determine suitability for your particular application prior to use in production.