S104 Adhesive Cleaner/Remover (22 LITER) | TensorGrip

In stock
Check for local delivery
$259.00

22 Liter Tensorgrip S104 Adhesive Cleaner and Remover in a Pressurized Cylinder Tank is perfect for safely and easily cleaning and removing adhesives, resins, and other tough substances. It’s formulated with CO-REZ Technology — an exceptional formulation incorporating a highly engineered resin and gas matrix. The result is greater coverage from less canister weight.

Advantages:

  • Exceptional cleaning, purging, and degreasing power
  • Non-Corrosive
  • Compatible with most plastics
  • Biodegradable
  • Cleans hoses, spray guns and other adhesive equipment
  • Decal residue removal – Safe for powder-coated surfaces
Financing Available for orders over $1,000

TensorGrip S104 Adhesive Cleaner and Remover in a 22 Liter Pressurized Cylinder Tank is a industrial grade adhesive cleaner and remover designed to safely and powerfully remove adhesives and other tough substances. S104 is suitable for use on most surfaces. S104 has exceptional cleaning and degreasing power while being Non-Corrosive, and it is compatible for use on most plastics. S104 Adhesive Cleaner was made to clean hoses, spray guns, and other adhesive equipment as well as decal adhesive residue removal. Popular among roofers for cleaning roofing polyurethane two part adhesive sprayers, hoses, equipment and resin removal.

DIRECTIONS FOR USE, S104 ADHESIVE CLEANER & REMOVER

  • TensorGrip S104 can be sprayed on and wiped off - Wash off any remaining residue with water.
  • The product will not be damaged by freezing - Warm up to room temperature for use.

For Spray Gun and Hose Cleaning:

  • Disconnect spray gun and hose from adhesive canister. 
  • Immediately connect to cleaner canister and open canister valve.
  • Flush out spray gun and hose for until clear (approx 45 seconds). 
  • Close canister valve and bleed pressure before disconnecting hose.

For Surface Cleaning:

  • Hold spray gun 6”–10” from surface. 
  • Spray even coat of cleaner on the surface. 
  • Wait 3–5 minutes before wiping for best cleaning performance.
 
More Information
SKU QG-CLEANS104-22L
Manufacturer Part Number S104-22L
Weight 45lb

TENSORGRIP S104 ADHESIVE SPRAY GUN CLEANER AND GLUE REMOVER SPECIFICATION DETAILS:

TYPICAL PROPERTIES:

Total Solids: 0%

VOC Content:

 466.97 g/L (Canister) / 77% by weight (Aerosol)

Color: Clear

System Flammability:

 Flammable

Solvent System Odorless mineral spirits

Shelf Life:

 12 months from date of manufacture

PACKAGING:

650ml Aerosol Can

7L

Disposable Canister

22L Disposable Canister

HANDLING AND STORAGE of S104:

  • Consult Safety Data Sheet prior to use. 
  • Do not store at temperatures over 120°F / 50°C. 
  • Avoid exposure to direct sunlight. 
  • Do not store directly on concrete floor. 
  • Always store above 60°F/15°C. 
  • When connected, keep valve open and hose pressurized at all times. 
  • Always test product to determine suitability for your particular application prior to use in production.

S104 is Biodegradable Non-Corrosive Adhesive Cleaner - Safely removes adhesives, resins, inks and other tough substances, use on polyurethane hoses, spray guns and other adhesive equipment, suitable for use on most surfaces, compatible with most plastics.

CHEMICAL TECHNICAL DATA: 

  • TYPICAL PROPERTIES
    • Total Solids: 0%
    • VOC Content: 350 g/L
    • Color: Clear
    • System Flammability: Flammable propellant
    • Solvent System: Acetone, Mineral Spirits
    • Dry time: 1-3 mins dependent on temperature & humidity
    • Shelf Life: 18 months from date of manufacture

S104 PACKAGING:

  • 650ml Aerosol Cans
  • 7-Liter Pressurized Cylinder Tank Canisters
  • 22-Liter Pressurized Cylinder Tank Canisters