36" x 58" Roof Ladder HatchGuard w/ Self-Closing Gate (YELLOW PC) #401020 | SRC
36" x 58" Roof Hatch Ladder Hatch Guard 401020 + Self-Closing Gate | Safety Rail Company
The SRC 36-inch x 58inch Roof Ladder Hatch-Guard with Self-Closing Gate 401020 from Safety Rail Company is Powder Coated Yellow and easy to install as a modular unit. The SRC Roof Hatch Guarding system is completely free-standing, requiring no penetration into the roof itself. Once assembled, this four-piece design simply slips over the top of the hatch with a compression fit around its curb, which also means that installation is fast in easy. Safe, user-friendly features including ingress/egress grab bars, a self-closing gate, and a 2' landing zone for workers exiting or entering the hatch.
- Part Number: 401020
- Color/Finish: Yellow, Powder Coat
- Dimensions: 36" x 58" x 42"
- Modular Design: No installation into building or roof required!
- Non-Penetrating: No drilling into hatch or roof
- Includes: Modular Roof Hatch Unit with a 36" Self-Closing Safety Gate
- 24” Safety Landing Zone for Workers and Roofers
- Built-in Grab Bars
36" x 58" Roof Ladder Hatch-Guard with Self-Closing Safety Gate #401020 from Safety Rail Companys is Powder Coated Safety Yellow. SRC Roof Hatch Railing systems are completely free-standing and fit right over the top of the roof hatch. The one-piece design means installation literally takes 5-10 minutes. Four rubber-tipped compression bolts are tightened against the curb of the roof hatch — that’s it. No need to drill, because no holes in the roof or roof hatch are required.
Roof Hatch Ladder Hatch Guards from SRC are your first line of defense against a fall through a roof hatch on flat roofs. Roof hatch openings on flat commercial roofs are an important feature in building design. When access to the roof is needed, roof hatch openings are often more convenient than portable or fixed ladders placed on the outside of buildings. Roof hatch openings do pose a fall hazard, however, when left open when people are up on the roof or left open for ventilation.
SRC Roof Hatch Railing Guards give you other bonuses as well. Each system comes equipped with a 2’ safe landing zone with which personnel can safely step out of the hatch, gain their footing, and then engage the gate. The reverse is true when re-entering the hatch. Our hatch guard also comes standard with grab bars to assist the worker as they climb in and out of the hatch.
- Manufacturer: Safety Rail Company
- Item: Roof Hatch, Ladder-Hatch Guard with Self-Closing Safety Gate
- Part Number: 401020
- Color/Finish: Yellow, Powder Coat
- Size: 36" x 58" x 42"
- OSHA-compliant fall protection
- One-piece design — No assembly required!
- No drilling into hatch or roof
- Self-closing safety gate included
- Includes two-foot safety landing zone for workers
- Built-in grab bars
| SKU | SRC-401020 |
|---|---|
| Manufacturer Part Number | 401020 |
| Manufacturer | Safety Rail Company |
| Weight | 146lb |
| Country of Manufacture | United States |
| Length | 58in |
| Width | 36in |
| Height | 42in |
36" X 58" YELLOW POWDER COATED ROOF HATCH LADDER HATCH GUARDS SRC 401020
An open roof hatch is no different than an open hole in the roof or floor through which people frequently fall. In fact, OSHA mandates that these holes be guarded with fall protection systems.
FALL PROTECTION SOLUTION:
Once assembled, this four-piece design simply slips over the top of the hatch with a compression fit around its curb, which also means that installation is a breeze. Also, its safe, user-friendly features — including ingress/egress grab bars, a self-closing gate, and a two-foot landing zone for workers exiting and entering the hatch — makes it the best roof hatch system in the industry!
