Roof Hatch Safety Rail Kit #500040, Non-Penetrating 30" x 36" (Yellow Rails, Bases + Gate) | BlueWater
Roof Hatch Kit #500040 | 30" x 36" Non-Penetrating Guardrails, Front Side Gate, Bases + Pins (Yellow Powder Coat)
BlueWater's Roof Hatch Guardrail System Kit 500040 is the only safety rail hatch kit on the market with an OSHA compliant gate assembly. This Roof Hatch Guardrail Kit comes with a 42" Safety Gate, 2 x 4 ft. Side Rails, 4 x Guardrail Bases, and Six Locking Pins.
- Non-Penetrating
- Compliant: Meets and exceeds OSHA's Fall Protection GuardRail Regulations
- Fast & Easy Install: Setup in minutes
- VERSATILE: Set up in almost any direction with various configuration options such as L-shapes, straight runs, squares, diagonals, etc.
- Easily disassemble for roof deck repairs or maintenance
- The safety gate can be opened by the latch pole or by one of the latches
- Color: High-Visibility, Safety Yellow
- Finish: High-Quality Powder Coat
- 1-5/8” Diameter Rails
- Use as a roof hatch, skylight guardrail protection, fire vent and floor door safety rail protection
BlueWater Roof Hatch Guardrail System Kit #500040 is reliable, efficient, long lasting expansions of the Safety Rail 2000 fall protection railings. Non-penetrating, passive fall protection safety railings for roof openings and areas of potential fall hazards such as roof hatch's, skylights, fire vents, floor doors, trap doors, access doors, and other hazardous areas.
INCLUDES:
- BlueWater Roof Hatch Kit #500040
- (1) 3.5 ft. Gate
- (2) 4 Foot Side Safety Rail Sections
- (4) BlueWater Counterweight Guardrail Bases
- (6) Locking Pins
Additional Features:
- Independently tested and shown to meet and exceed OSHA Fall Protection Regulations for Guardrails
- Exceeds OSHA standard 29 CFR 1910.29
| SKU | BLU-500040-1 |
|---|---|
| Manufacturer | BlueWater by Tractel |
| Weight | 526lb |
| Country of Manufacture | United States |
| Length | 49in |
| Width | 48in |
| Height | 45in |
Roof Hatch Safety Rail Kit #500040, Non-Penetrating 30" x 36" (Yellow Rails, Bases + Gate) | BlueWaterKits
This guardrail roof hatch kit will fit roof hatch sizes:
- 30" Wide x 36" Long Roof Hatch with Front Exit
- 30" Wide x 30" Length Roof Hatch with Front Exit
BlueWater Roof Hatch Kit 500040 Includes:
- (1) 3.5 ft. Gate
- (2) 4 Foot Side Safety Rail Sections
- (4) BlueWater Counterweight Guardrail Bases
- (6) Locking Pins
Item: Front Side Guard Rail Kit
Guard Rail Kit Size: Width x Length: 30" x 30"
A setup using a chain DOES NOT meet (Standards – 29 CFR ) 1910.23 (a)(2) The chain does not provide a mid-rail as required. Click here to see the most recent OSHA interpretation.
1910.23(a)(3)(i) Hinged floor opening cover of standard strength and construction equipped with standard railings or permanently attached leave only one exposed side. When the opening is not in use, the cover should be closed or the exposed side should be guarded at both top and intermediate positions by removable standard railings.
