RhinoBond Hand Welder (OMG)
This lightweight, portable induction welder is designed to bond RhinoBond plates to TPO and PVC membranes in hard to reach areas such as under rooftop equipment and on vertical surfaces. The stand-alone RhinoBond Hand Welder is ergonomically designed and features a vibrating handle and indicator lights to let users know when the tool is activated and when the weld cycle is complete. The base features a recessed centering design to help users properly align the tool over RhinoBond Plates for optimum bonding.
FEATURES & BENEFITS:
-
The hand welder only weighs 6lbs. - ensuring easy application across entire roof.
-
The stand-alone hand welder is independent & not tethered to another tool, making it highly portable to go anywhere on the roof.
-
The base is recessed & has centering indicators to help users properly align the tool over a RhinoBond Plate for improved productivity.
-
The tool has both visual and tactile indicators during the weld cycle, including a vibrating handle and a LED indicator light.
-
The tool includes variable energy settings for optimum calibration based on membrane thickness and ambient temperature.
- Includes a durable storage case, and three 8-in. tall magnets.
-
RhinoBond Tools operate on 110V and 220V power sources for global use.
International plug configurations are available from OMG for global use, as are 12 Ga. 100-ft. (30 m) power cords (sold separately).
APPLICATION:
RhinoBond is compatible with mineral wool, polyisocyanurate (PIR), and hard cover boards as well as any insulation that will not melt by the induction welding process. When using induction welding over XPS or EPS, use a minimum 1⁄4-in. (6 mm) cover board or 4-in. (102 mm) cardboard discs under each plate to protect the insulation from melting. When using RhinoBond over a metal deck, a minimum of 11⁄2-in. (38 mm) of insulation is required for proper tool operation. On foil faced insulation, the recommended minimum cover board is 11⁄2-in. (38 mm).
IMPORTANT TIP: Whenever the ambient temperature changes up or down by 15°F or more (8°C or more), recalibrate the RhinoBond tool.
Cat. No. | Description | Weight (lbs) | International Compatibility |
---|---|---|---|
RB-HandWelder | RhinoBond HandHeld Tool | 6 | |
RBM003A-10pk | RhinoBond 10 Pack Mini Magnet Set | 40 | |
RBPLUGKIT-F16A | Type F Plug Kit | 0.5 | Netherlands, Germany, Spain, Greece |
RBPLUGKIT-G13A | Type G Plug Kit | 0.5 | United Kingdom, Hong Kong |
RBPLUGKIT-I10A | Type I (10A) Plug Kit | 0.5 | China |
RBPLUGKIT-I15A | Type I (15A) Plug Kit | 0.5 | Australia, New Zealand |
RBPLUGKIT-IEC60309 | Type IEC60309 Plug Kit | 0.5 | Ireland |
SKU | OMG-HandHeld-Rhinobond |
---|---|
Weight | 6lb |
The RhinoBond Hand Welder is a stand-alone unit designed for exclusive use with OMG manufactured RhinoBond Plates. RhinoBond Hand Welders operate on 110V and 220V power sources. Please refer to the RhinoBond Hand Welder Owner’s Manual for additional information and details.
- The hand welder is independent and not tethered to another tool, making it highly portable for use anywhere on the roof.
- Operates on 110V and 220V power sources for global use.
- Includes a storage case, and three eight-inch tall heat-sink magnetic cooling clamps.