GRACO
Probler P2 Spray Gun (GCP2R0)
In stock
For high output spray polyurethane foam and polyurea applications.
- Easy daily maintenance
- Responsive trigger action
- Easy-to-replace mix chamber insert
- Anti-crossover design virtually eliminates possibility of material entering the air piston
- Ergonomic handle and balanced design
Financing Available for orders over $1,000
The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.
For high output spray polyurethane foam and polyurea applications.
- Easy daily maintenance
- Responsive trigger action
- Easy-to-replace mix chamber insert
- Anti-crossover design virtually eliminates possibility of material entering the air piston
- Ergonomic handle and balanced design
Probler P2 Gun Assembly with 00 Mix Chamber Kit
SKU | GRA-GCP2R0 |
---|---|
Manufacturer Part Number | GCP2R0 |
Manufacturer | GRACO |
Weight | 0lb |
- Easy daily maintenance.
- Responsive trigger action.
- Easy-to-replace mix chamber insert.
- Anti-crossover design virtually eliminates possibility of material entering the air piston.
- Ergonomic handle and balanced design.
Air Inlet Size (in) | 1/4-18 |
---|---|
Air Inlet Thread Gender | Male |
Air Inlet Thread Type | NPSM |
Applicator Type | Manual |
Compatible Material | Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating |
Component A Inlet Size (in) | 1/2 |
Component A Inlet Thread Type | UNF |
Component B Inlet Size (in) | 7/16 |
Component B Inlet Thread Type | UNF |
Component Type | Plural-Component |
Fluid Orifice Size (in) | 0.029 |
For Use With | Reactor Plural Component Proportioner, Reactor Spray Foam and Coatings Equipment |
Gun Activation | Manual |
Gun Included | 1 |
Gun Type | Air-Purge |
Gun Weight (lb) | 3.9 |
Gun Weight (oz) | 62.4 |
Maximum Air Inlet Pressure (MPa) | 0.76 |
Maximum Air Inlet Pressure (psi) | 110 |
Maximum Air Pressure (MPa) | 0.76 |
Maximum Air Pressure (psi) | 110 |
Maximum Flow Rate (lb/min) | 40 |
Maximum Fluid Pressure (MPa) | 24.1 |
Maximum Fluid Pressure (psi) | 3500 |
Maximum Fluid Temperature (°F) | 200 |
Maximum Fluid Working Pressure (MPa) | 22.1 |
Maximum Fluid Working Pressure (psi) | 3200 |
Minimum Air Inlet Pressure (MPa) | 0.62 |
Minimum Air Inlet Pressure (psi) | 90 |
Minimum Flow Rate (lb/min) | 3 |
Model | P2 |
Overall Height (in) | 4.75 |
Overall Length (in) | 3.125 |
Overall Width (in) | 6.875 |
Pattern Size (in) | 9 in @ 24 in from target |
Product Type | Spray Gun |
Purge Method | Air |
Series | Standard |
Spray Gun Mix Type | Impingement |
Spray Pattern | Flat |
Trigger Lock | Locking |
Type | Spray Gun |
Wetted Parts | Stainless Steel, Carbon Steel, Chemically Resistant O-Rings, PTFE |