OlyBond 500 Two-Part Adhesive Canister Kit | OMG
OMG OlyBond500 Canister Kit Polyurethane Spray Foam Insulation Adhesive
Self-Contained, Equipment-Free, Application Option
Each set of OlyBond500 Canisters comes with a disposable 25-foot application hose, gun assembly, six mix tips and three 17-inch extension tubes that allow roofers to stand upright during application for better ergonomics and less fatigue.
ROOF DECKS AND SUBSTRATES: Structural concrete • Gypsum • Cementitious wood fiber plank • Lightweight insulating concrete • Steel (22 gauge or thicker with approved cross section) • Plywood (5 ⁄8 in. thick min.) • Smooth surface BUR • Smooth and granular surface modified bitumen (properly prepared) • Existing sprayed in place polyurethane foam • Base sheets • Most vapor barriers (including asphaltic and fleece-top)
ROOF INSULATION AND COVER BOARD: • Expanded Polystyrene • Polyisocyanurate (4-ft. x 4-ft.) • High Density Wood Fiber • Perlite • Certain Extruded Polystyrene • Most cover boards
OMG Roofing Adhesive Canister Kit, OlyBond500 Canisters are an equipment free, easy-to-use option for applying OlyBond500® Adhesives. OlyBond500 Canisters can provide up to 20% more coverage, up to 35 squares per set, depending on the conditions and insulation used. In addition, OlyBond500 Canisters enable users to spatter the adhesive for use with fleece backed membranes. Spattering provides a better looking roof and can reduce membrane installation time for improved productivity. Each set of OlyBond500 Canisters comes with a disposable 25-foot application hose, gun assembly, six mix tips and three 17-inch extension tubes that allow roofers to stand upright during application for better ergonomics and less fatigue. OlyBond® is a fast-acting, two-component, low-rise polyurethane foam adhesive designed to adhere most insulation types to a wide selection of common roof decks and substrates. OlyBond500 can be used in both new and reroofing applications, including jobs that require multiple insulation layers.
FEATURES & BENEFITS:
- OlyBond500 Canisters offer fast start-up and shut down for improved rooftop productivity, and empty canisters are easy to dispose.
- OlyBond500 Canisters can provide up to 20% more coverage and up to 35 squares per set for insulation attachment, depending on the weather conditions and insulation type.
- OlyBond500 Canisters also offer a spattering option for fleece backed membranes.
- OlyBond500 Canisters can be applied in temperatures ranging from 40°F to 100°F (4°C to 38°C) for year-round use.
- OlyBond500 Canisters come with a disposable 25-foot (8 m) hose and gun assembly, for a wide reach radius on the roof.
- The gun assembly has a trigger lock to prevent accidental dispensing.
- OlyBond500 Canisters do not require any additional application equipment, so there’s nothing to maintain.
- OlyBond500 is odor free, has ultra-low VOC levels, and can provide a highly productive application method for installing roofing materials.
WEIGHT / PACKAGING:
- OB5001-Tank OlyBond500 Canister Part 1 = 48 lbs. Each
- OB5002-Tank OlyBond500 Canister Part 2 = 38 lbs Each
- OB500PT-GunKit Replacement hose and gun set = 5 lbs. Each
- OB500PT-MixTip10 Bag of Ten Mix Tips = 3 lbs. Each
- OB500PT-MTipExt10 Bag of Ten Mix Tip Extension Tubes = 2 lbs. Each
| SKU | OMG-OB500-CAN-KIT |
|---|---|
| Weight | 99lb |
OMG OLYBOND 500 ADHESIVE CANISTER TANK APPLICATION:
The adhesive is applied in pre-foamed beads that quickly rise to approximately 1-inch above the substrate. The board is then laid into the adhesive and walked into place. A chemical cure takes place in a few minutes after application depending on the weather conditions. The adhesive is designed for use in temperatures of 40°F to 100°F (4°C to 38°C), and with 4-ft. x 4-ft. (maximum) for most insulation boards.
APPROVALS:
- OlyBond500 is approved by most roof system manufacturers and is Factory Mutual, Miami Dade, Underwriters laboratories and Florida Building Code approved.
- FM APPROVED
