CHEM LINK

M-1 CR Clean Room Adhesive/Sealant 10.1 Oz. GRAY (Case of 16) | Chem Link F1224GR

In stock
Check for local delivery
$303.84

Chem Link M-1 CR Clean Room Low-VOC Sealant Adhesive 10.1 Oz. Gray, CASE-16 #F1224GR.

  • COLOR: Gray
  • PART NUMBER: F1224GR
  • SIZE: 10.1 Ounce Tubes
  • CONTAINER: Cartridge Tube Caulk
  • QUANTITY: 16-PACK
  • VOC COMPLIANT: Less than 15 grams per liter
  • ENVIRONMENTALLY FRIENDLY: Meets CARB, BAAQMD, SCAQMD
  • SOLVENT FREE: 100% solids, will not shrink
Financing Available for orders over $1,000

M-1 CR (Clean Room) 10.1 oz GRAY 16-PACK is a thermosetting, moisture cure sealant which does not contain solvent or isocyanates. M-1 CR has been tested for airborne molecular contamination and is approved for semiconductor clean room use. Fully cured M-1 CR releases virtually no molecular air contamination at room temperature. M-1 CR is specified for biomedical, electronics, and aerospace clean rooms where contamination of the air and working surfaces cannot be tolerated. M-1 CR also used in food processing, hospitals, schools, offices and public buildings.

  • COLOR: GRAY
  • PART NUMBER: F1224GR
  • SIZE: 10.1-Ounce Tubes
  • CONTAINER: Cartridge Tube Caulk
  • QUANTITY: 16-PACK
  • VOC COMPLIANT: Less than 15 grams per liter
  • ENVIRONMENTALLY FRIENDLY: Meets CARB, BAAQMD, SCAQMD
  • SOLVENT FREE: 100% solids, will not shrink

 

More Information
SKU CHE-F1224GR
Manufacturer Part Number F1224GR
Manufacturer CHEM LINK
Weight 21lb
Country of Manufacture United States

INSTALLATION: Bonding surfaces must be clean, dry and free of oxidation, mill oils, wax, and release agents that may interfere with adhesion. Dry and fully cure painted surfaces before bonding. Alcohol and ammonia water are effective cleaners for surface preparation. Abraded or irregular surfaces are acceptable bonding surfaces but must be clean and sound. All substrates must be free of manufacturing defects. This product sets rapidly upon exposure to moisture.