M-1 Adhesive/Sealant, 20 oz Sausage Packs (CASE of 12) BLACK
ChemLink M-1 (BLACK) 20 oz. Sausage Tube 12-Pack #F1190BL
Universal Structural Adhesive & Sealant
ChemLink M-1 20-oz. Black Sausage Tubes are a moisture curing polyether adhesive sealant for applications in damp, dry, or cold climates. M-1 is solvent free, contains no isocyanates and will not shrink upon curing or discolor in sunlight. M-1 forms a tough elastic waterproof seal to most roofing materials, masonry, wood, glass, aluminum and foam. M-1 bonds well to most building surfaces including: metal flashing, copings, skylights, and HVAC surfaces.
- SOLVENT FREE:Â 100% solids, will not shrink
- NON SLUMP:Â applies vertically and overhead
- COLOR STABILITY:Â good stability, will not suntan
- GUN GRADE:Â no special tools required
- TEMP RANGE: apply at temps as low as 32°F
*Delivery details may vary depending on size and/or color of M1 20 oz. sausage pack order.
Chem Link M-1 #F1190BL Black, 20 oz. Sausage Tubes are a moisture curing, multi-purpose structural adhesive + sealant designed for bonding and sealing a wide range of construction materials including PVC, EPDM, most metals, wood, glass, masonry concrete, fiberglass and solvent-sensitive foams, and more. M1 delivers nearly 400 psi shear strength and remains elastic after cure—up to 300% elongation, so it also performs as a structural adhesive.
- Commercial Roofing:Â Repair of flashing and coping joints, sealing reglet joints and termination bars, night seals around penetrations, bonding walkway treads and just about any type of emergency roof repairs.
- Residential Roofing: Chimney and step flashing, skylights, roofing details, cove joints. Penetrations: Sealing pipe, cable, conduit penetrations through walls and roofs. Walls, windows, doors: Masonry and curtain wall construction.
- Lightning protection:Â Bonding grounding cables Solar: Mounting solar panels, assembling components, waterproofing power distribution
- Masonry and concrete:Â Crack repairs, horizontal and vertical expansion joints, bonding metal brackets
- Mechanical:Â Sealing ducts, insulation, flanges and piping Sealing termination bars
Compatible Substrates:
- EPDM and SBS Mod Bit.
- Aluminum and Galvanized Metal.
- Stainless Steel.
- Engineered Plastics, PVC.
- Glass.
- Fiberglass FRP.
- Wood Block and Brick.
- EPS Foam.
- Concrete and Stone.
Basic Uses:
- Expansion joints.
- Pre-cast concrete.
- Block and Masonry.
- Window and door frames.
- Siding.
- Parapets.
- Cove Joints.
- Transportation.
- Weather Sealing.
SKU | CHE-F1190BL |
---|---|
Manufacturer Part Number | F1190-BL |
Manufacturer | CHEM LINK |
Weight | 20lb |
Country of Manufacture | United States |
M1 Adhesive Sealant Installation:
- Bonding surfaces should be clean, dry and free from all contamination that may inhibit the sealant’s performance.
- Isopropyl alcohol is an effective cleaner for surface preparation.
- Install all joint applications per ASTM and SWRI recommendations and guidelines.
- Please contact customer service for application guidelines for temperatures below 32°F (0 degrees Celsius).
- Maintain sealant at room temperature before application to ensure adequate tooling and adhesion.
- This product sets rapidly upon exposure to moisture.
Â
Â
Â
Â
Â