FOAM OFF MP - 5 Gallon Pail
FOAM OFF | MP™
Flexible & Rigid Polyurethane Foam Cleaner
FOAM OFF MP is Highly effective in flushing and immersion cleaning of spray equipment, mixing and metering equipment, feed lines, mixing heads, troughs, conveyor parts, side walls, rollers, and foam cutting devices. It is also ideal for removing resins and polymers from Injection Molds and Urethane Adhesives from roll coating and dispensing equipment.
FOAM OFF | MP™ Effectively Removes:
Cured Urethane Foam deposits Flexible & Rigid Polyurethane Foam Urethane and Industrial Adhesives
Features & Benefits:
- Low VOC
- High resin/polymer loading - can be used for an extended period
- Recyclable via vacuum distillation- resulting in reduced disposal costs
- Residue free - No Rinsing required
- Due to its low vapor pressure and high boiling point - it evaporates 237 times slower than Acetone and MEK; 600 times slower than Methylene Chloride. Therefore, whatever quantity you purchase, you will use and not loose to evaporation.
Global Specialty Products FOAM Off MP
Low emission, solvent-based Urethane foam cleaner, a suitable replacement for Methylene Chloride, acetone, MEK, acetates, etc.
Enhanced worker safety, environmentally friendly, non-hazardous, non-flammable, non-HAPs, NON-CHLORINATED, NON-AEROSOL, BIODEGRADABLE SOLVENT-BASED cleaner designed to remove Flexible and Rigid TWO COMPONENT Polyurethane Foam Adhesives. It cleans like Acetone & Methylene Chloride without the hazards. It is effective on both MDI, polyester-polyols and polyether-polyols as well as cured polyurethane adhesives. It provides fast, residue free, and complete removal of cured or un-cured rigid urethane foam deposits and buildup from mixing heads, gear pumps, troughs, side walls, conveyor parts, rollers, molds, foam cutting devices, holding tanks, feed lines and mixing equipment. This product cleans down to the bare metal surfaces; it is easy to use.
In addition, FOAM Off™- MP ELIMINATES disposal costs by recycling the spent material via vacuum distillation.
|Manufacturer Part Number||D-W179567-P|
|Manufacturer||Global Specialty Products|
|Country of Manufacture||United States|
A direct replacement for Methylene Chloride, N-Methyl-2-Pyrrolidone, and NMP-based products. Suitable to remove all dried Flexible Polyurethane Foams originated from Aromatic Diisocyanates including: • TDI - toluene diisocyanate • MDI - methylenediphenyl diisocyanate; including all three isomers 2,2'-MDI, 2,4'-MDI, and 4,4'-MDI (4,4'-diphenylmethane diisocyanate) Rigid Polyurethane Foam which is a high-performance material for Insulating Panels and Construction Cross-Linked (Cellular, Closed-Cell, and Thermoset Plastic of Low Density) originated from: • Polyisocyanurate (Polyiso) • Extruded Polystyrene (XPS) • Expanded Polystyrene (EPS) (Between 77 and 150 °F) is capable of removing dried polyurethane foam from the mix head, mixing & dispensing equipment, feedlines, tanks, tolling, Rollers, spray guns, molds, floors and underneath the ISO pumps along with some vertical metal surfaces etc. Is more effective than Methylene Chloride, NMP, BLO, MEK and other flammable and hazardous chemicals. It offers extended bath life (tolerates high resin loading) and reduced waste and disposal costs (recyclable via vacuum distillation). Applications (Flexible Polyurethane Foam): Cushioning in: Upholstered furniture / Beds & Mattresses / Entry Garage doors (laminated with wood) Carpet Cushion / Automotive Seating / Arm rests and Headliners / Apparel Padding / Shoe Insoles / Filtration Packaging / Sponges Applicators / Medical and Technical Applications / Insulated Panels & Doors / Marine and Transportation / Building and Construction / Tank and Pipe / Protective Coatings Applications (Rigid Polyurethane Foam): Rigid foam sheathing insulation for building and construction material (roof and wall insulation, insulated windows, doors and air barrier sealants) FOAM