Fall Ban Cable Guard System, Basic Straight Run Kit | 100', 200', 400' and 500' Kits
FallBan Roof Perimeter Cableguard System | Basic Straight Run Kits
The Cable Guard Fall Protection Kit from Fall Ban provides a safety “guardrail”, either temporary or permanent around the perimeter of the roof. Three horizontal steel cables are anchored to the roof and attached to vertical steel stanchions spaced at 20 foot intervals along the area to be protected, then tightened to form railings. Once the cablegaurd system is installed, it protects and prevents roofers, HVAC contractors, and anyone on the roof from accidental falls from the roof edge.
COMPATIBILITY: Basic Kits can be adapted to standard roofs, flat roofs, gravel stop edges and gutter edges.
Kit Sizes:
- 100' Standard Kit Includes: 6 Complete Stanchions, 5 Mid Braces, 2 diagonal Braces, 2 Anchor Plates, 300' of Cable, 100' Warning Flag Line
- 200' Standard Kit Includes: 11 Complete Stanchions, 10 Mid Braces, 2 diagonal Braces, 2 Anchor Plates, 600' of Cable, 200' Warning Flag Line
- 400' Standard Kit Includes: 21 Complete Stanchions, 20 Mid Braces, 2 diagonal Braces, 2 Anchor Plates, 1200' of Cable, 400' Warning Flag Line
- 500' Standard Kit Includes: 26 Complete Stanchions, 25 Mid Braces, 2 diagonal Braces, 2 Anchor Plates, 1500' of Cable, 500' Warning Flag Line
The FallBan CableGuard System is a Roof Perimeter Fall Protection System that can be used on 3 different roof types! Made for use on Flat Roofs, Parapet Roofs, and Overhang Roofs. Fall Ban Cable Guard Straight Run Kits use Standard Cable, Stanchions, and other components to provide money + time saving OSHA compliance on any job site that requires perimeter fall prevention or safety rail. The Fall Ban Cable Guard Kits are super easy to install and last for decades with a patented high quality design that is proudly Made In America.
When roofers are free to work unrestricted by harnesses, ropes, or lanyards their productivity and efficiency increases resulting in quicker job completion - This means higher profit margins per job, with time saved!
Fall Ban Straight Run Basic Cable Guard Kits:
- Meets OSHA and Canadian SOR requirements
- Easy and quick set up
- Increases efficiency and productivity on the roof
- Usable on many different roof edge types
- Lighter and stronger than wood frame systems
- Affordable even on big roof areas
- Doesn’t get in the way of roofing
- Stanchions can be spaced up to 20 feet (6 M Canadian)
- Temporary or permanent installation (Stainless Steel available for permanent)
- Allows freedom from harness, ropes and lanyards
- Projects look professional and organized
- Keeps workers safe and reduces injuries
- Increased company profits while being OSHA and SOR compliant.
Installation in 4 Simple Steps:
- Once you’ve decided where a perimeter fall protection is to be installed, measure and mark 20 ft intervals on the roof perimeter edge for stanchions placement.
- Assemble stanchions to the particular roof edge type required.
- Install stanchion, mid brace, diagonal braces, cables, and misc. hardware.
- The roof is ready for work to commence, safe and unrestricted.
1.) MEASURE |
2.) ASSEMBLE |
3.) INSTALL |
4.) WORK |
 |
 |
 |
 |
Included with each Cableguard Basic Straight Run Kit:
|
Kit Size (Feet) |
Complete Stanchions |
Mid Braces |
Diagonal Braces |
Anchor Plates |
Cable |
Flag Line |
|
100' |
6 |
5 |
2 |
2 |
300 ft. |
100’ |
|
200' |
11 |
10 |
2 |
2 |
600 ft. |
200’ |
|
400' |
21 |
20 |
2 |
2 |
1200 ft. |
400’ |
|
500' |
26 |
25 |
2 |
2 |
1500 ft. |
500’ |
| SKU | FB-STANDARD-STRAIGHT-RUN-KIT |
|---|---|
| Manufacturer | FALL BAN |
| Country of Manufacture | United States |
New FallBan Roof Cable Guard Rail Fall Prevention and Fall Protection System components for Straight Run Basic Kits.
- The New FallBan contains stainless-steel with factory applied Anti-Seize on working threads. All adjustable threaded parts are now stainless-steel to minimize rusting, corrosion, and seizing.
- The Stanchions, Diagonal Brace, Extension Bar, and Parapet Clamps now have added drainage holes to prevent destructive expansion from freezing water.
- On the stanchions we’ve modified the radius on corners and added an additional adjustment hole for Diagonal Brace attachment.
- On the Mid Braces we've corrected the angle, changed the top cable attachment hole to better fit the cables, added stainless steel threaded components and reshaped the drainage hole.
- Corner Roller Assembly, Stanchion Support Plates and Anchor Plates all have a different radius on corners and minor changes.
- FallBan is now available in the standard US (OSHA) version with 3 cables and a Canadian (SOR) version with only 2 cables; we also have an adaptor to convert the standard 3 cable stanchion to 2 cables (for use in Canada).
- A simple weight attachment can be used to assure proper cable tension.
-
A Single Fall Protection System for most of your roofing jobs = Fall BAN!
- Other additions are a Toe Board attachment and a swivel for the Diagonal Brace attachment, simplifying the installation process on virtually any leading edge angle.
KIT SIZES INCLUDE:
|
Kit Size in Feet |
Complete Stanchions |
Mid Braces |
Diagonal Braces |
Anchor Plates |
Cable |
Flag Line |
|
100' |
6 |
5 |
2 |
2 |
300’ |
100’ |
|
200' |
11 |
10 |
2 |
2 |
600’ |
200’ |
|
400' |
21 |
20 |
2 |
2 |
1200’ |
400’ |
|
500' |
26 |
25 |
2 |
2 |
1500’ |
500’ |
Fall Ban Cableguard Perimeter Fall Protection Kits are Compatible With 3 Roof Types:
1.) Standard Roof Edge – Which includes multiple edge designs. Works on flat roofs up to 4/12 pitch
2.) Parapet Roof – The parapet fits a variety of parapet designs and widths
3.) Overhang Roofs – With the overhang design any outward pressure is transferred to the under side of the roof deck
