CHEM LINK

Doublestick Roof Repair Tape (Full Cases)

In stock
Check for local delivery
As low as $22.14

DoubleStick Roof Repair Tape is an advanced MicroSealant™ tape with a removable siliconized release liner on each side. Designed to bond two surfaces, even two surfaces made of two or more dissimilar materials. DoubleStick creates a tight, permanent, waterproof seal. DoubleStick remains flexible to temperatures as low as -70° F making it virtually impossible to thermally shock the seal causing a leak. DoubleStick bonds to a wide range of surfaces including EPDM, TPO, aged PVC, SBS, APP modifieds, asphalt BURs, coal tar BURs, tiles, shingle, coated and non-coated aluminum and metal roofs, galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene, fiberglass, brick, concrete, masonry, OSB board, shielding membranes, etc.

Double Stick Tape:

  • 60 mills thick
  • For use between two surfaces including dissimilar surface materials
  • Twist into rope and use to fill voids, gaps and holes
  • Good for night tie-offs
Financing Available for orders over $1,000

Basic Use Double Stick Roof Repair Tape tape is a self-sealing adhesive creating a water-tight, conformable seal between two or more irregular surfaces, and/or creates a weather proof, permanent bond between two or more similar or dissimilar surfaces. Use as a lap seal, under the foot of an equipment curb or skylight, or roll it into a bead or ball of MicroSealantâ„¢ to form a gasket, seal a gap or seal, or as needed.

INSTALLATION:

Surface must be clean and dry. Moisture, dust, dirt or other foreign matter should be removed. Remove oil and grease, etc. with isopropyl alchohol or a non-residue cleaner such as acetone or lacquer thinner. Remove salt and other contaminants. To apply the DoubleStick, remove one side of the release liner and apply to the surface to be protected or bonded. Rub or roll with pressure using your hand or steel roller to activate bonding process. Remove the second release liner and apply second surface to tape, apply pressure. DoubleStick also can be used as a putty. Remove both release liners and roll into a rope. Place over gap and mold to seal opening. This material may be applied to clean dry surfaces from 150° F to -20° F ambient. Treat surface with EternaPrime for installations from 40° F to -20° F ambient.

More Information
SKU CHE-F23XX-1
Manufacturer CHEM LINK
Safety Sheet (219.09 kB)

Basic Use DoubleStick tape is a self-sealing adhesive creating a water-tight, conformable seal between two or more irregular surfaces, and/or creates a weather proof, permanent bond between two or more similar or dissimilar surfaces. Use as a lap seal, under the foot of an equipment curb or skylight, or roll it into a bead or ball of MicroSealantâ„¢ to form a gasket, seal a gap or seal, or as needed.