CAV-GRIP III Low-VOC Adhesive/Primer (LARGE) 85-lbs. Tank 332659
CAV-GRIP Spray Adhesive/Primer 85 lbs. Tanks for TPO and EPDM Roof Membranes
CAV-GRIP III Low-VOC Aerosol Contact Adhesive/Primer can be used for a variety of applications: adhering FleeceBACK®, standard Sure-Weld® TPO, and Sure-Seal® EPDM membrane to vertical walls, enhancing the bond between Carlisle’s VapAir Seal™ 725TR and various substrates, and priming unexposed asphalt prior to applying FAST™ Adhesive for insulation attachment. CAV-GRIP III can also be used with standard TPO and EPDM membranes as a substrate adhesive on horizontal surfaces for warranties up to 20 years. CAV-GRIP III EC cylinders meet the requirements for pressurized cylinders in Canada and the European Union. The below features, benefits, installation, storage, and precaution criteria also apply to CAV-GRIP III EC cylinders.
- SIZE: 85# (60 pounds of adhesive) pressurized tanks.
- PART NUMBER: 332689
CAV-GRIP Adhesive/Primer in 85 lb. cylinder tanks for TPO and EPDM membranes is a labor-saving spray gun-applied adhesive CAV-GRIP III requires no stirring, has a quick application time, no flash-off and can be used for a variety of applications. CAV-GRIP III can be used with standard Sure-Weld® TPO, and Sure-Seal® EPDM membrane as a substrate adhesive on horizontal surfaces for warranties up to 20 years. CAV-GRIP III can also be used to adhere FleeceBACK®, standard Sure-Weld TPO, and Sure-Seal EPDM to vertical walls; enhancing the bond between Carlisle’s VapAir Seal™ 725TR and various substrates; and priming unexposed asphalt prior to applying FAST Adhesive for insulation attachment. Additionally, this adhesive can be used in cold temperatures, and has a 5-minute set-up time. All of this allows CAV-GRIP III to provide up to 60% labor savings compared to traditional adhesives.
- Manufacturer: Carlisle, WeatherBond
- Part Number: 332689
- Size: 85 lb. Tank
|Manufacturer Part Number||332689|
|Manufacturer||WeatherBond Roofing Systems|
|Country of Manufacture||United States|