A-110 MELTER - Propane Gas | A&A Melters Rubber Master
A-110 STANDARD PROPANE MELTER
The A-110 Standard is very versatile and can be transported easily in the back of a pick-up; can be hoisted directly to the roof. Easily accommodated in commercial elevators, the A-110 fits through standard 34″ doorways and can be equipped with optional casters for easy movement. Stainless steel fire tube comes standard.
Heated Material Output:
- Efficiency: 78.9%
- Material Capacity: 100 US Gallons | Output Aprox. 80 gal/hr
- Heat up time: 30-40 min’s
*Shown with optional trailer.
A&A Melters A-110, Standard, Air-Jacketed Hot Rubber Melter
Standard Equipment: Model A 110, Gas
- 110 U.S. gallon capacity
- Honda 5.5 Hp. Air cooled gas engine
- SEW/EURODRIVE gear reducer
- Belt activated agitator clutch
- (1) LPG torch (manual control, complete)
- Stainless steel fire tube
SPECIFICATIONS: A-110 |
|
|---|---|
| Heat Transfer Oil | None Required |
| Fire Tube | 4″ sch 80 Stainless Steel Pipe |
| Capacity | 100 US Gallons; Output: 80 gal/hr, Efficiency: 79% |
| Agitator | Honda 5.5 H.P. Air-Cooled Engine, 110 V Electric or Optional Diesel Engine |
| Overall Dimensions (Melter Only) | L-88″ W-33 5/8″ H-45″ 1,500 lbs |
| Burner | Adjustable Liquid Propane 1 X 500,000 BTU or Optional Beckett Diesel Burners |
| Temperature Controls | Optional |
| Inner Shell | 3/16″ Rolled Steel |
| Outer Shell | 1/8″ Rolled Steel |
| Insulated jacket | 1/2″ Super high temp + 2″ High Temp. Fiberglass |
| Suspension 4″ Drop Axle | 3500 lb. Axle and Springs |
| Optional Trailer (w/ Melter mounted) | L-146″ x W-58″ x H-66″ 1,775 lbs |
| Brakes | Optional |
| Tow Hitch | As ordered c/w safety chain |
| Shipping Weight (Melter only) | 1500 lbs |
| Shipping Weight (Trailer only) | 275 lbs |
| Pump | Optional 1 1/2″ Viking |
| Horizontal Wand Pumping System | Optional |
| Tires | 2 X 6.00 X 14″ |
| Trailer Chassis | 4″ Steel Channel |
| SKU | AAM-A110-SD |
|---|---|
| Manufacturer | AA Melters |
| Weight | 1500lb |
| Country of Manufacture | Canada |
| Length | 88in |
| Width | 34in |
| Height | 45in |
A110 MELTER OPTIONAL EQUIPMENT:
1. Heavy Duty 4” channel trailer with 14” tires, rims, fenders, lights, 2” ball Hitch, tongue jack, kwik connect/disconnect kettle mounts = $2,700.00
- Heavy Duty trailer mounted lifting lugs = $525.00
2. Automatic Temperature Controls = $3,000.00
3. Heavy Duty 8” Phenolic high temperature castors, (2) pivoting c/w brake (2) fixed, includes hardware = $450.00
4. VIKING Material Pump c/w pulley’s, belts, guards = $2,850.00
5. Crack Seal Gun - Horizontal wand system c/w 1 ½” x 25’ flexible stainless steel jacketed hose, application wand = $3,675.00 *note* must be purchased in conjunction with pump
6. Fuel Conversion - Propane = $625.00 | Diesel = $2,850.00
7. A-110 Diesel Burner Conversion – 110V-$2,900.00 12Volt $6,300.00 - Diesel-Diesel 12Volt System (Motor, Burners, ATC) $5,150.00 -Diesel Plug in Burner system-available with gas or electric motor $2,350.00 -12V Diesel Burner with Honda Gas Engine $2,750.00
8. FLAME Guard = $400.00
9. Heated Hose System – 25’ with heated wand = $6,800.00 *note* must be purchased in conjunction with pump
10. Fume Guard - Complete Lid = $4,000.00
11. Fume Guard - Retrofit = $2,850.00
