6" x 100 ft. Peel & Stick Uncured Econo Flashing (2-ROLLS) Adaptable #327687 | WeatherBond
(2-ROLL/CT) WeatherBond #327687 Peel and Stick Uncured Econo Flashing, Adaptable, 6 inch x 100 ft.
6-inch by 100-foot Peel & Stick Uncured Econo Flashing is a nominal 40-mil thick (1.5 mm) uncured EPDM membrane, laminated to a nominal 30-mil thick (0.76 mm), fully cured adhesive. This product is easily malleable and highly adaptable to irregular shapes and surfaces. Econo Uncured Flashing is self-curing and can be used to flash pipes and scuppers, as well as other rooftop structures and penetrations. The clear poly release liner on the 12"-wide product is pre-slit down the center, allowing the applicator to partially remove the liner for ease of installation.
- Adaptable to irregular shapes and surfaces
- Self-curing membrane
- Labor and cost savings in field applications
- Item: 6" x 100-Foot Peel & Stick EPDM Econo Flashing
- Quantity: 2 Roll Pack Case
- Manufacturer: WeatherBond Roofing Systems
- Made In The USA
WeatherBond Self-curing 6" Peel and Stick Econo Detail Flashing  and can be used to flash pipes, scuppers and other roof system structures and penetrations. 6-inch by 100-foot Peel & Stick Uncured Econo Flashing is a nominal 40-mil thick (1.5 mm) uncured EPDM membrane, laminated to a nominal 30-mil thick (0.76 mm), fully cured adhesive #327687 from WeatherBond. This product is easily malleable and highly adaptable to irregular shapes and surfaces. Econo Uncured Flashing is self-curing and can be used to flash pipes and scuppers, as well as other rooftop structures and penetrations.
- Item: 6" x 100-Foot Peel & Stick EPDM Econo Flashing
- Quantity: 2 Roll Pack Case
- Manufacturer: WeatherBond Roofing Systems
- Color: Black
- Base: Membrane – EPDM Adhesive – Synthetic Rubber
- Ozone Resistance Condition: No Cracks  after exposure to 100 pphm Ozone in air for 168 hours @ 104°F (40°C). Specimen under 50% strain.
- Brittleness Temperature: -49°F (-45°C)
- Nominal Thickness: 70 mil (1.78 mm)
- Made In The USA
Typical properties and characteristics are based on samples tested and are not guaranteed for all samples of this product. This data and information is intended as a guide.
| SKU | WB-FLASH327687 |
|---|---|
| Manufacturer Part Number | 327687 |
| Manufacturer | WeatherBond Roofing Systems |
| Weight | 30lb |
| Country of Manufacture | United States |
