FlashCo 6" Pre-Fabricated PVC Sealant Pockets are reservoirs for embedding irregular penetrations and conduit bundles in one-part sealant. The vertical walls create a perimeter around the penetration while the reinforced PVC flange ties into the existing field membrane. FlashCo’s Pre-Fabricated Sealant Pockets are constructed with a coated metal sub-base and weldable PVC flange. The two-piece design allows for fast, easy installation by removing the need to disconnect conduits or lines.
FlashCo.
6" Pre-Fabricated PVC Sealant Pocket (White)
In stock
Check for local delivery
$42.99
FlashCo 6" x 6" x 12" White PVC Pre-Fabricated Pourable Sealer Pocket.
These single-ply roofing flashing accessories are made with a two-piece design using PVC single-ply membrane, and coated metal. These pre-fabricated molded penetration sealant pockets can be cut to size with premade vertical lines for accurate measurements.
- Size: 6" x 6" x 12"
- Material: PVC Membrane
- Save up to 60% of labor
- Waterproof difficult penetrations
- No disconnecting conduits or lines
Financing Available for orders over $1,000
Applications: For use where two separate PVC accessory pieces are needed to form a watertight seal around a roof penetration while doing single ply roofing.
- Size: 6" x 6" x 12"
- Material: PVC Membrane
- Save up to 60% of labor
- Waterproof difficult penetrations
- No disconnecting conduits or lines
- Custom sizes available to fit larger penetrations
| Membrane Material Details | ||
|
Material |
Thickness |
Colors |
|
PVC |
.060” (60 mil) |
White, Tan, Gray |
STANDARD SIZES & PACKAGING |
|||||
|
Description |
Sub Base |
Flashing |
Qty/Box |
Wt./Box |
Box Size |
|
4”x4“ |
8”x8” |
12”x12” |
8 ea. |
9.6 lbs. |
12“x12”x12” |
|
6“x6” |
10”x10” |
14”x14” |
6 ea. |
10.2 lbs. |
12“x12”x12” |
|
8“x8” |
12”x12” |
16”x16” |
4 ea. |
8.8 lbs. |
16“x16”x12” |
| SKU | FLA-SEALERSPSP06 |
|---|---|
| Manufacturer Part Number | SPSP06 |
| Manufacturer | FlashCo. |
| Weight | 2lb |
| Country of Manufacture | United States |
FlashCo 6" x 6" x 12" White PVC Pre-Fabricated Pourable Sealer Pocket. These single-ply roofing flashing accessories are made with a two-piece design using PVC single-ply membrane, and coated metal. These pre-fabricated molded penetration sealant pockets can be cut to size with premade vertical lines for accurate measurements.
FlashCo Pre-Fabricated PVC Sealant Pockets are reservoirs for embedding irregular penetrations and conduit bundles in one-part sealant. The vertical walls create a perimeter around the penetration while the reinforced PVC flange ties into the existing field membrane. FlashCo’s Pre-Fabricated Sealant Pockets are constructed with a coated metal sub-base and weldable PVC flange. The two-piece design allows for fast, easy installation by removing the need to disconnect conduits or lines.
Applications: For use where two separate PVC accessory pieces are needed to form a watertight seal around a roof penetration while doing single ply roofing.
- Size: 6" x 6" x 12"
- Material: PVC Membrane
- Save up to 60% of labor
- Waterproof difficult penetrations
- No disconnecting conduits or lines
- Custom sizes available to fit larger penetrations
| Membrane Material Details | ||
|
Material |
Thickness |
Colors |
|
PVC |
.060” (60 mil) |
White, Tan, Gray |
STANDARD SIZES & PACKAGING |
|||||
|
Description |
Sub Base |
Flashing |
Qty/Box |
Wt./Box |
Box Size |
|
4”x4“ |
8”x8” |
12”x12” |
8 ea. |
9.6 lbs. |
12“x12”x12” |
|
6“x6” |
10”x10” |
14”x14” |
6 ea. |
10.2 lbs. |
12“x12”x12” |
|
8“x8” |
12”x12” |
16”x16” |
4 ea. |
8.8 lbs. |
16“x16”x12” |
Customers also viewed
