6-Foot VG Series Vertical Lift 72" Safety Gate | Fabenco #VG15-72PC
72" FabEnCo VG Series Vertical Lift Gate
The 6-Foot VG Series Vertical Lift safety Gate #VG15-72PC is an extra wide safety gate with vertical lift capacity from Fabenco and Tractel that is made of carbon steel, and powder coated safety yellow for high visibility.
Size Options:
- 6 Foot Gate #VG15-72PC
FabEnCo 6 ft. VG-Series Vertical Lift Swing Safety Gate VG15-72PC for job sites, warehouses, indoor and outdoor use. Provides a safe, extra-wide entrance to specific job site and work areas with vertical lift capacity. The Vertical Lift Safety Gate provides fall protection in areas that do not have adequate swing clearance. Applications include staircase, ladder and platform openings.
- Size: 6’ width, the ideal solution for confined spaces.
- Meets or exceeds OSHA standards.
- A36 Carbon Steel with Safety Yellow Powder Coat
- Your Vertical Lift Gate comes essentially fully assembled. Proper installation requires two people, a few basic tools and about 10 to 15 minutes.
|
Model No. |
Fits Clear Opening* |
Estimated Weight |
|
VG15-48PC |
4’ |
50 lbs. |
|
VG15-72PC |
6’ |
60 lbs. |
| SKU | FAB-VG15-72PC |
|---|---|
| Manufacturer Part Number | VG15-72PC |
| Manufacturer | FabEnCo |
| Weight | 60lb |
| Country of Manufacture | United States |
| Length | 4in |
| Width | 73in |
| Height | 4.5in |
Shop 6ft VG-Series Safety Gate #VG15-72PC FabEnCo Vertical Lift Swing Safety Gates for job sites, warehouses, indoor and outdoor use. Provide with extra-wide entrance to specific areas with vertical lift capacity. The Vertical Lift Safety Gate provides protection in areas that do not have adequate swing clearance. Applications include staircase, ladder and platform openings.
- Sizes: Available in 4’ and 6’ widths, the ideal solution for confined spaces.
- Meets or exceeds OSHA standards.
- A36 Carbon Steel with Safety Yellow Powder Coat
|
Model No. |
Fits Clear Opening* |
Estimated Weight |
|
VG15-48PC |
4’ |
50 lbs. |
|
VG15-72PC |
6’ |
60 lbs. |
Installing Fabenco VG Series Vertical Lift Gate:
Your Vertical Lift Gate comes essentially fully assembled. Proper installation requires two people, a few basic tools and about 10 to 15 minutes.
Step 1: With the help of a partner, put the gate in the down position and latch it into the receiver post. Move entire assembly into approximate position.
Step 2: Align the left edge of the receiving post mounting plate flush with the edge of the opening. Do not leave a large enough gap to permit a person to slip through, between the post and the edge.
Step 3: Once in position, mark position of mounting plate holes on floor and drill holes to accept four (4) 1/2” fasteners per post (not provided).
