1-PART Pourable Penetration Sealant-GRAY (Case of 4) Chem Link #F1426GR

Call for availability
$179.00

SOLVENT FREE    |   100% solids, will not shrink

UV STABILITY       |   good UV stability, will not suntan

SELF LEVELING    |    no special tools or mixing required

WIDE RANGE       |    apply at temperatures as low as 32F

Financing Available for orders over $1,000
1-Part is a moisture curing, pourable sealant designed for use in pitch pans and warranted ChemCurb/E-Curb penetration seals. 1-Part is suitable for application in damp, dry, or cold climates. 1-Part is solvent free, contains no isocyanates and will not shrink upon curing. 1-Part has resilient “elastomeric” properties and excellent adhesion to most construction materials.
More Information
SKU CHE-SEALER-1/2GAL-GR
Manufacturer Part Number F1426GR
Weight 6lb
INSTALLATION Bonding surfaces should be clean, dry and free from all contamination that may inhibit the sealant’s performance. Brush away all gravel or loose granules. Isopropyl alcohol is an effective cleaner for surface preparation. Do not extend 1-Part with foreign materials or liquids. The seal surface will skin over and will be water tight in approximately 1 hour. Do not use if rain is anticipated within 4 hours. Please contact customer service for application guidelines with temperatures below 32°F (0°C). Do not use on TPO without the use of TPO primer. Do not use on Hypalon. Smooth APP membranes require a granulated target. This product sets rapidly upon exposure to moisture.